Eric Dollard

[Aaron]

Theory, calculation & operation of the colorado springs tesla transformer by eric dol



NEW RELEASE * THEORY, CALCULATION & OPERATION OF THE COLORADO SPRINGS TESLA TRANSFORMER BY ERIC DOLLARD

We're very excited and honored to be a part of history where Eric Dollard shows a working 20:1 scale model replica of Nikola Tesla's Colorado Springs Magnifying Transformer!

If you ever wanted to know the truth down to the finest detail on what Tesla actually did, here is your opportunity. Not only will you learn the operating theory and more data than you will ever want to know, you'll get all details on how to replicate a 20:1 scale model along with an actual demonstration by Eric Dollard and Bruce Gavin. So, it's not just talk, you see the demonstration that blew everyone away!

Go here to get your copy now & learn more - see some pics!! Theory, Calculation & Operation of the Colorado Springs Tesla Transformer by Eric Dollard

When you check out of the shopping cart, make sure to click the GREEN button to access the download. Details are here: http://www.energeticforum.com/redire...wnload-help%2F - A & P Electronic Media This is INSTANT ACCESS - you do not need to wait for an e-mail to come with download instructions - you're already there.

On the download page, you can get the 3 zip files that have everything in hi resolution format, but it's fairly large. If you have limited bandwidth, you can get the lower resolution ones that are quite a bit smaller (still a lot of megabytes). The point is that you do NOT need to download all 6 zip files, just hi-res or lower-res. Hi Res is 1920x1080 and the lower one, which is still high quality is 1280x720.

There are 5 things that come with this package.

Part 1 of the 4 hour presentation
Part 2 of the 4 hour presentation
20 minute demonstration video
35 minute white board overview of the demonstration setup
553 page PDF of the PowerPoint presentation

The introductory discounted price is only good for the next 24 hours then it goes up to the regular price.

Go here to get your copy now & learn more - see some pics!! Theory, Calculation & Operation of the Colorado Springs Tesla Transformer by Eric Dollard

A portion of the proceeds to go EPD Laboratories, Inc., a 501(c)3 non-profit organization dedicated to the work of Eric Dollard.

If you attended the 2019 ESTC, use the code given at the conference for your special ESTC discount. It was emailed to you yesterday, check your spam box if you can't find it.

[BroMikey]

I am posting these links around to FACEBOOK and telling all my
friends. Can I get coupon to tie my over til I get the money in the
bank?

[Aaron]

real cost of the Tesla presentation

I am posting these links around to FACEBOOK and telling all my
friends. Can I get coupon to tie my over til I get the money in the
bank?

There is already a discount until tomorrow morning.

Maybe you could become an affiliate? Details here: Affiliate Program Signup - A & P Electronic Media

Keep in mind the project was nearly $30,000.00 USD in parts, labor, etc.

$20k for the replica - but that included thousands of dollars worth of Bruce Gavin's time to verify, test, re-verify, plot data, etc. for Eric's presentation, which we did not have to pay him for. That was a crazy amount of time Bruce spent doing the tests that Eric needed. We spent about $6500 for the build. Then another $1500 or so for travel to the conference and that wasn't the entire bill. Then another $500-550 for the build to come motor freight in a pallet to the conference.

For $37 ($47 tomorrow), that already is a ridiculously low price considering the real value invested. I personally put 200 hours into helping Eric build the PowerPoint alone - $37 doesn't even cover 30 minutes of my time. And the many, many months of non-stop reading, writing, calculating, etc. of Eric's time. If Eric got paid what his time is worth and me and Bruce, this would easily be a $100k project. $250 per copy of the presentation would be a good deal in my opinion and that would still be underpriced.

I'm obviously biased, but the value of this presentation is priceless and I recognize the full value of it.

With that being said, it wouldn't cost you that much to replicate it since all the hard work and details are worked out. I'd say for the cost in parts plus the RF amp, etc. it can be replicated for a couple thousand.

[BroMikey]

Wow, that is something to think about. If I had extra time

I guess you are worth the extra $10 Thanks for the hard work.

This will turn out to be the biggest rave online, watch for real power
handling builds. It looks like I have almost everything to build it.

Just have to make everything the right size and the pattern is already
laid out. It will be worth it all in the end. I guess $47 won't break me

[aminnovations]

This makes a great deal of sense. One question -- by M you presumably mean mutual inductance, but what do you mean by K? Surely not the dielectic constant?

In general, please do post updates here in this thread when you are updating your blog. I think that many people do not check your website regularly and would otherwise miss them.

Hi Marcus,

By L, C, M, and K, I am referring to the four different forms by which energy can be stored in a winding, consistent with Eric Dollard's models for the electric and magnetic fields of induction:

L = Inductance in Henry.
M = Mutual Inductance, per Henry.
C = Capacitance in Farad.
K = Mutual Capacitance, per Farad.

Yes I can update this thread when I release relevant posts on my website. Since I wrote last I have added the following posts:

Parts 1 and 2 of the Spark Gap Generator:

Spark Gap Generator - Part1 | AMInnovations

Spark Gap Generator Measurements – Part2 | AMInnovations

A review and analysis of a 1920s H.G. Fischer Daithermy Unit:

1920s H.G. Fischer Diathermy Unit | AMInnovations

And my latest post is a write-up of the endeavour that emerged at the ESTC 2019 conference after Eric Dollard's demonstration and presentation of the Colorado Springs experiment. There was an endeavour to retune and operate the Colorado Springs demonstration from one of the MWO generators, (multiwave oscillator spark gap generator). There is a video of Eric Dollard and I working together to measure and retune the system, and then running the system to show interesting Tesla related phenomena. The post also includes additional schematics and impedance measurements of the overall experiment from both before and after modification to work with the MWO generator:

ESTC 2019 - Tesla's Colorado Springs Experiment | AMInnovations

Best wishes,
Adrian

[Aaron]

Thanks Adrian

Hi Adrian,

Special thanks to you and all your help and support at the conference!

Was awesome to see you get the pulse modulator for the MWO working on the Tesla Transformers.

I just purchased the network analyzer - can't wait to get it and try it out! I'm sure I'll have some questions for you

Will show Eric your post on the conference experiments on your page when I see him next - in about 2 weeks.

[Aaron]

Recording available - eric dollard's live call - q & a colorado springs tesla transfo

RECORDING AVAILABLE - ERIC DOLLARD'S LIVE CALL - Q & A COLORADO SPRINGS TESLA TRANSFORMER PRESENTATION

When I was down in West Central Nevada at EPD Laboratories, Inc. we recorded this live call where a few people asked some questions related to the presentation. Go here to listen to it now: 2019-08-12 Live Call Eric Dollard on 20:1 Scale Model Replica of Tesla's Colorado Springs Transformer - Eric P. Dollard - Official Homepage

Eric Dollard hit a grand slam with his presentation and demonstration of the 20:1 scale model replica of Tesla's Colorado Springs Transformer, which is available here: Theory, Calculation & Operation of the Colorado Springs Tesla Transformer by Eric Dollard

[Aaron]

Watch new Dollard interview

Electromagnetic Theory by Oliver Heaviside

Much of Oliver Heaviside’s work is unknown to most electrical engineers but they are somewhat familiar with Heaviside’s Telegraph Equation.

In Heaviside’s Electromagnetic Theory books, Parts 1, 2 & 3 there are quite a few concepts that cover the very nature of energy and what it actually is that most people have never heard of.

The reason this topic is so important is because it rewrites the very foundation of energy science and shows what energy is and what it isn’t. Essentially, virtually everyone uses the term ENERGY incorrectly and what this all leads to is very disruptive to the current paradigm.

Go here to watch the video: Eric Dollard's new Research on Oliver Heaviside - Eric P. Dollard - Official Homepage

[David G Dawson]

810 Vacuum Tubes

Hello Aaron,

810 Vacuum Tubes:

Quote:

Eric Dollard arrived at my home a couple days ago and we're hot on another project. A couple 810 vacuum tubes, large transformers and chokes a bunch of other heavy and hard to find components that I purchased 4 yeras ago for a very specific purpose... if we can get it done in time for the 2020 ESTS, we're going to demonstrate it; if not, 2021 for sure!! No matter how challenging this all is, my goal is to have it done. I'm not saying what it is or what it will do, but it will blow your mind and knock your socks off at the same time - that's for sure. For some people, it's going to freak them out for sure because it is like something from the Outer Limits!"

Well now you have done it as I am all ears for any of the vintage Vacuum Tube projects but all I can raise here are a couple of NOS 805s but should do the job.

810s are now either not available or too expensive to buy but I do also have 813s.

It was the Carbon Anodes that I was attracted to as I had an instinct that there was a suspicious reason for using the Carbon which was later replaced by metal.

Have a Harold Strand Tesla project here where I was going to use the 805s in place of an 811A.

http://freenrg.info/TESLA/Tesla%20-%...27s%20Coil.pdf

If you want a replication built, please let me know as I believe I was the only one that built all of Eric's Tube schematics he presented back in 2012 which I am still indebted to him for. Don't like the Math but a schematic is 100 x more informative and that probably goes for nearly everyone involved in 'Energy Synthesis'.

Perhaps a snide remark with respect to Eric's Conference presentation which I purchased but failed to gain little of bench interest.
Excellent string of Presenters you have prepared but difficult for those of us 'down under' to grasp.
Still have James DeMeo's presentation to review and should be interesting.

The bench is pretty bare when all you have in front of you is Math that really means nothing to you, unfortunately, excepting a great deal of work to figure out its meaning.

Cosmic Ray Detector (CRD) still working and promising to make a Video on its history but time is limited. A Solar Minimum event will allow for an increase in Cosmic Rays and that is now being reported.

Respectfully.

Smokey

[Aaron]

Audio Modulator

Hi David,

It's a project I've wanted to do for a long time and I plan to be able to present it at next year's conference. It's really a universal system as I can do so many things with it since its all modular.

I have two old Air Force 19" racks in my shop and will be making about 8 separate rack mount units for them both.

The dual 810 tube unit is a push pull audio modulator and the tubes are fed by a rectified 2400v potential transformer - this is based on a design in one of the RCA tube manuals. This audio modulator will be driven by a 30 watt audio amplifier that will be built to Western Electric specs - based on a design in one of the Bell Lab Practices manuals. The output transformer will either be a 100 pound RCA AM Transmitter from the 1940s that I already have or two smaller ones. This entire arrangement is a super high fidelity complex waveform generator where a simple digital signal generator like what I offer with my Bedini RPX Sideband Generator combo kits can be used at the input of the 30 watt audio amp, computer output, cd player, records, or anything else. What this output will do - I don't want to say at this time but that is the arrangement.

In the second rack will be a virtually identical setup but for RF.

I still want to build a Cosmic Ray Detector, etc. like you have at some point. The above-mentioned project with the audio modulator will only be the second tube project I've ever built. The first is a 4 stage Ukaco machine based on probably the only surviving original unit in the world, which I have. Bedini's wasn't original - it was modified by John Cjeka.

Anyway, working with Eric on this - when the two racks are done and some of the final experiments are done (which there are unlimited experiments that can be done - I'm interested in just a few) - it will be my PhD education in making mil spec rack equipment from scratch. lol Truly a priceless education that I am deeply thankful for.

Working on drilling out everything on the panels and chassis right now and when Eric takes off, will have to get a bit of it done at a metal working shop and will get the panels powder coated. We've made pretty good progress so far!

[Marcus Neuhof]

Don't like the Math but a schematic is 100 x more informative and that probably goes for nearly everyone involved in 'Energy Synthesis'.

Perhaps a snide remark with respect to Eric's Conference presentation which I purchased but failed to gain little of bench interest.
Excellent string of Presenters you have prepared but difficult for those of us 'down under' to grasp.
Still have James DeMeo's presentation to review and should be interesting.

The bench is pretty bare when all you have in front of you is Math that really means nothing to you, unfortunately, excepting a great deal of work to figure out its meaning.

Hello David,
The sales page for the conference presentation advertises that the documents give "Every Detail On How To Replicate It".

Are you saying that this is not the case?

[aminnovations]

Transference of Electric Power

Hi,

I have added a new post to my website:

Transference of Electric Power - Part 1 | AMInnovations

This post includes video experiments, measurements, and a preliminary analysis of the modes of transmission between the transmitter and receiver of a TMT system.

The experimental work is intended to investigate and demonstrate aspects of the following:

1. Tuning measurements using a vector network analyser to measure Z11, the small signal ac input impedance for the experimental system, from the perspective of the generator.

2. Tuning the transmitter and receiver to different points to demonstrate different transference phenomena.

3. Single wire transmission and the longitudinal magneto-dielectric (LMD) mode.

4. Tuning to power a load within the single wire transmission line.

5. Tuning to power a load at the output of the receiver.

6. Tuning to establish the LMD mode of transmission between the transmitter and the receiver.

7. Tuning to establish the null point of the LMD mode within the single wire load.

8. Tesla’s wireless transmission of electric power in the near field, using a pair of tuned Tesla magnifying transformers (TMT).

9. Transference of electric power between the transmitter and receiver in the near field.

Best wishes,
Adrian

[Aaron]

Live call today

ERIC DOLLARD LIVE CALL - DECEMBER 8, SUNDAY, NOON PACIFIC TIME ZONE

Next Sunday, we're having a live telephone conference call with Eric Dollard. Conference Call Dial-in: 1-857-232-0155, Conference Code: 582590

Join us on the call and ask questions about any of Eric's past presentations, what his future ones will be about or anything on Eric P. Dollard - Official Homepage - The only man who has replicated Tesla's wireless transmission technology.

[Aaron]

Chris Carson Rotary Electrostatic Converter

More to come on the Chris Carson Rotary Electrostatic Converter:

http://www.energeticforum.com/renewa...is-carson.html

[Aaron]

2019-12-08 Eric Dollard Live Call

New live call on youtube:
2019-12-09 eric dollard live call - Eric P. Dollard - Official Homepage