Peter, whatever happened with Eric P. Dollard?

[Aaron]

new thread for continuation

Please continue this thread here:
http://www.energeticforum.com/renewa...p-dollard.html

This thread is being closed to prevent any more posts from being deleted.

NOTE: All of Garrettm4's posts in this thread have been recovered.

[Geometric_Algebra]

Primary/Secondary Assembly Iteration #1

Secondary: Roughly 24 turns of RG316 (L-com.com) on 13.74 inch diameter form, with wire spacing 0.120".

Primary: 1.5" wide Georgia Copper (2.71 grams/in specific weight), 1 turn on 13.74 in diameter, and ending with an additonal 3/16 turn on 13.24 inch diameter.

Center frequency: Theoretical 1.87Mhz, Measured 1.6Mhz, which just barely enters the AM band.

Test setup for measuring center frequency:
Input: 2.8V pk, sinusoid, 1.6Mhz, from a 50 ohm input impedance function generator source connected directly to the primary loop with mini-grabber test clips.

Output: 174V pk, sinusoid, with oscilloscope probe shunted directly across secondary. Probe is a 60Mhz bandwidth, 46 pF input capacitance, 10Meg ohm input resistance, cheapo ebay special, using a Tektronix TDS210 oscillscope. Secondary is very senstive and output characteristics change with objects moving 6-8 inches and closer to the coil.

I do have a basic python script for calculations, some emc2 g-code files for router manufacturing, conductor empirical measurements, and other associated files if anyone would like to use/modify.

[Michael Kishline]

Garrett4, Gone without a trace, almost!

Hmm I'm not sure where Garrett's posts went however if you're quick google cache is your friend



You mean actually listen to and verify what Eric is saying Blasphemy!

Google Cache turned up nothing http://webcache.googleusercontent.co...p-dollard.html

Internet Archive "Waybackmachine" turned up nothing, latest search was May 2010. Garrett joined August 2011. http://web.archive.org/web/201005220...p-dollard.html

But Energetic Forum still has 37 Quoted Posts when you do a Thread Search for "Garrettm4".
http://www.energeticforum.com/search...earchid=598383

Have fun

Mike

[Aaron]

he deleted his own posts

Energetic Forum did NOT get hacked. Plenty of members have asked me so I'll post it here instead of replying to every personally. Garrettm4 deleted his own posts.

[Raui]

Hmm I'm not sure where Garrett's posts went however if you're quick google cache is your friend

So you still think that the electrons are the source of electricity? Or do you believe there are lines of force, or aether, being the cause of electricity?

Dave

You mean actually listen to and verify what Eric is saying Blasphemy!

[madhatter]

I should clarify, this is AC voltage reading

[nw7w7]

Garrett ?? No ..Why ... uuggg.. Did anyone copy his post by chance?? you have been such a help in all this. What a shame hope you come back and all is well ...

[madhatter]

Agreed, a SNAFU.

Hopefully he returns.

In other news...
I built another set of coils for 4Mhz, It's the upper end of the amateur radio band and should prove to be more difficult to receive on. Although I'm not getting any 'sound' I did notice one thing of interest, with no circuit load there is little to no voltage potential, set up a load and the potential climbs. at the moment it'll fluctuate between .7~1 volt of potential between the ground plane and radial ground antenna. capacitance value is critical and I'm going to sit and see what I can calculate to tune this.

The larger crystal set is awaiting wider copper strap at the moment.

[Web000x]

NFG = No F***ing Good

[lessismore]

Garrett's Posts Missing - NFG

I'm not sure what NFG actually stands for - but the loss of Garrett's posts from this thread is definitely NFG

Garrett, hope all is well with you.

[Gestalt]

Where did Garrett go?

I'm also wondering what happened to all of Garrett's posts?

Did anyone keep a backup/copy of all his posts?
Please pm me, he had some awesome explanations and information.

[jake]

@Garrett,

It is a shame that you took down your posts. Eric said that it was a great help to have you around so that he had somebody else to answer questions because your understanding of his math is quite clear.

Dave[/QUOTE]

Yes it is a shame.

I was going through all his posts specifically. Did the man get to you or are you going to write a book? (i'll buy one)

I guess that explains why all the pages shifted.

[Web000x]

Lots of great theory but sadly nothing that crashed any of my einstein education yet.

So you still think that the electrons are the source of electricity? Or do you believe there are lines of force, or aether, being the cause of electricity?

@Garrett,

It is a shame that you took down your posts. Eric said that it was a great help to have you around so that he had somebody else to answer questions because your understanding of his math is quite clear.

Dave

[dR-Green]

It would help us a lot if you could make a sketch of your set-up to show how much does it deviate from the published circuit.

This is how it's all connected in the video. Not sure about the LED polarity.

[IMG=http://img263.imageshack.us/img263/4500/receiverpatent.jpg][/IMG]

I've been able to get better performance with Eric's "power" circuit since, using a bigger load, and using just about every combination of primary-secondary connections I can think of. They all work, which is why I'm now suspecting the LED polarity had something to do with it. I'll have to test it to confirm, but a 12v 1.1W 21 LED array that doesn't seem to care for polarity works much better than the smaller load of the 3v 6 red LEDs... Although everything shows strange behaviour and normal LEDs don't care for polarity as much as they usually do etc. Lots of variables and things to figure out

[dR-Green]

well tesla intended to power airplanes as well though

Yeah, I don't know how he intended to do that with all the known inefficiencies etc. This is what I was starting to work on the other night which led to the last video. Using a metal plate "ground plane" on the transmitter output and a metal plate receiver as a "mobile" reception system having no physical contact, the reception drops off very quickly in the range of mm. Maybe the requirements for this situation involves a lot of transmitters placed around the planet, and/or the earth itself in resonance

Apparently aquatic vehicles are not a problem, but cars and planes are something else.