One magnet no bearing Bedini motor

[Lidmotor]

More ideas

@ JonnyDavro---Great idea about using the reed switch with the orbiting small magnet. I don't think that it cost any energy and it is a good way to trigger energy back to the source.

I have been doing alot of work with what I now call the "Flux Field Generator". I found out that these strong rotating flux fields that we are generating go right through matter as long as it in non-magnetic. Plastic, wood, plants, dirt, and even lead don't stop it. I made a silly whimsical video showing how it does it. I name my projects for fun and the latest one I call "Maggie". In this video I introduce her to some of my other projects that I have named "Hewey", "Dewey", "Lewey", and "Fringe". It is sort of a childish way to show the energy field but hopefully people will get the point.

I got my cylinder magents finally in the mail and they work great. Thanks Jonny. If you stick a piece of wood dowel rod down the hole you make a top out of it and it is easy to spin up that way. I made a very small FFG (flux field generator) yesterday that runs nicely on 1.5 volts and uses one of these cylinder magnet

Here is my video of "Maggie " meeting the "boys".
YouTube - Maggie meets the "BOYS" & Wireless transmission of energy through matter
Cheers,

Lidmotor

[Joit]

Lol. I think your Tape 'Silent Runner' is gone.
Best way to erase Tapes is to hold a Magnet beside it.
But anyway, nice Setup.
The EM Field is still huge, i do play around with 4 Stronger Magnets, what are stick 2x2 together,
and when they move, the Screen from my Osc, what is a half Meter away still moves around like a Swing
And last 2-3 Months i erased 2 Bankcards from me.

[jonnydavro]

Hi.I have done a bit more work on the revolving sphere acting as a switch idea.When the small sphere is revolving around the lid i place under the base of the coil,it goes around nicely when the rotor is not spinning to fast like in lidmotors vid but if you crank the speed up,it wants to turn into a stable satellite.This is not what we want but then it dawned on me that we already have the ideal solution.
We can use an orbiting satellite,the small sphere in a container type which spins around in a nice circle up to 13" away from the rotor like i showed in my first satellite vid.Whats more,to change the switching frequency,we just use smaller or bigger containers.I have tried it tonight and it works great.
@Synchro.This method makes changing frequencies simple and you can adjust them on the go.I think your ideas with the hall effect is great as i go through loads of reed switches which seem to weld themselves together at the first opportunity.
@El-tigre.I have been thinking about ferro fluid too.I may try and get hold of some as i think it may act really strange in the rotating magnetic field and who knows what uses we may find for it including your generator idea.
@Johnnblade.Your last vid makes things a lot clearer,thanks for that.I think you may have found something here as if you can manipulate the magnet with the control your showing then it may be possible to drastically reduce friction but i think this technology could have a lot wider applications in other fields.Keep up the great work.
@Xenomorph.I got the relay from what we call a car boot sale.A bloke was selling all his electronic bits so i bagged the lot,mostly resistors,caps,etc but it had a few relays in but only one of this model.
The relay was made by magnetic devices ltd and is a dpdt.There are no numbers on it.I am pretty sure you would get similar results with most relay coils.A square holed one may work good too but with the round hole,the windings are closer.If you want,i will test a square holed relay coil as i think the others i have are that type and that will save you rooting about unless you have one handy but it will be later in the week when i get some free time.
@Lidmotor.I am glad you have got some cylinders.I thought the snake egg was economical to run but these cylinders will spin on very little power like you have found out.
I would love to see you try something with the switching idea as it should work nice on your rig if the rotor is not going to fast.
I have done a few stabilisation tests like you suggested and i found that if i put a 5mm axially magnetised rod magnet down the centre hole and place a metal object above,it stabilised nice.What i like about that method was you can switch between stable and free roaming in a second.

[JohnnBlade]

Homemade reedswitch - finally running a magnet motor on batteries

Hi All,

@El Tigre: ill keep on testing different things, and ill keep it posted
and i will also try the sphere above my levitron donut magnet.
and about ferrofluid, today i used ferrofluid with the sphere in the tube
it kinda makes the sphere really quiet, and it more harder to get it in a energetic spin
here is an old link of me testing neo magnet with ferrfluid (Ferrolfuid can mess things really up with it comes to stains :P)
YouTube - ferrofluid wheels sliding / skating and absorbing - JB Greets JB

@JonnDavro: Thank you, most of my test ive done are with the stator magnet.
the faster and unstable the sphere moves it creates more amps for me. Greets JB

--

Mostly I was testing the One magnet no bearing Bedini magnet sphere motor, but it kept on running
on my adaptor, that creates a vibrating field when using the coil.
and that i cannot reproduce using batteries

i wanted to have a magnet motor running only on batteries, and i tried the Bedini circuit, but i dont have the right transistor to make it work, so i needed something like a reedswitch so i made my own

i used some simple holder, some foil paper, and a flexibel piece of plastic, and a small neo magnet
when the north pole passes my reedswitch it switches on the battery every quart cycle, and then the rotor magnets get turned on and pushes the disk round.

atleast now i can test with batteries, solarpower, and generator coil

hooked it up to the battery and placing it close to the rotor magnets made my disk spin.

next is now to see how much i can generate out of this


YouTube - homemade reedswitch Bedini neo magnet motor 2 batteries JB



Greets JB

[JohnnBlade]

homemade reedswitch part 2

here is my homemade reedswitch that i build from simple materials
that i still have to test more and adjust it, but it does it work

YouTube - homemade reedswitch Bedini neo magnet motor 2 batteries part 2 JB


Greets JB

[Xenomorph]

Satellite Levitation

A quick test on completely levitating the satellite sphere magnetically.
It is very hard to adjust, but it can be much improved by diamagnetic applications.

YouTube - Satellite Levitating 3

[JohnnBlade]

A quick test on completely levitating the satellite sphere magnetically.
It is very hard to adjust, but it can be much improved by diamagnetic applications.

YouTube - Satellite Levitating 3

Hi Xenomorph,

Nice work what you are doing

have you tried to see whats happens when you hold a stator magnet to the sphere, so you can control the sphere in speed, and direction

Greets JB

[Xenomorph]

@JohnBlade:

I have tried that but stators would stall the sphere too much.
After all the sphere is being influenced by the main rotor and with a stator by 2 additional magnets, thats too messy of a magnetic field superimposition.
Ideally one magnet lifts the sphere upwards and the main rotor gives it the axial spin. That will yield in the fastest rotation.
I am really after stable steady Levitation to maximize the rotational speed for maximum output.
What you are doing is to go the way of maximizing the translational speed for maximum output. I had best results for picked up energy with hectically bouncing spheres in a toy egg, as the flux change is very high when its doing that, so there is a lot to recover that way for sure.

[el-tigre]

meissner effect levitation

A quick test on completely levitating the satellite sphere magnetically.
It is very hard to adjust, but it can be much improved by diamagnetic applications.

YouTube - Satellite Levitating 3

Nice test, very interesting. Check out this messiner effect demonstration

YouTube - Magnetic Levitation

I suggested this method of levitating the rotor a few pages back. I still think it has some possibility. The bedini coil could be set up either on top of this levitating magnet or to the side. Or maybe you could build a large air core coil and put your superconductor inside it then fill the core with liquid nitro and spin your rotor on top of that. If you can increase rotation speed by 50% you should be able to increase generator output a great deal on these high speed rotors.

Play buy your superconductors here...

[Xenomorph]

@ El-Tigre:

Superconductor-based Levitation is interesting indeed but
Liquid nitrogen is not cost-effective in the long run for me, maybe for someone else here.
Magnets and diamagnetic materials are also much easier to use :

YouTube - levitation Homopolar motor

It will be very difficult to build an effective levitation apparatus in regards to energy output, as it involves careful magnet adjustment, framework construction and perfect coil specs and positioning. And the main rotor is always prone to be influenced by additional magnets, that will need careful attention too.

[JohnnBlade]

Magnetic switch/Reedswitch part 3

Hi All,

Since i started this Bedini project, thnx to JonnDavro
i kinda still think i never used the Bedini circuit or all
atleast i made my sphere produce 2.50v max, but all the time im using an adaptor of 2.9v, 300mah max, coil drawing 22mah
made my sphere produced power/energy

i got tired of using my adaptor, cause i wanted to
the motor to work on solar, and batteries.
so these days ive been trying to run my motor/rotor on batteries
i tried Bedini's cicruit but having the wrong transistor keeps my motor from working on batteries (already took all the transstors out of my old amplifier) untill i tried to make my own homemade reedswitch/magnetic switch. i had my simple part 1 reedswitch, and my more pro homemade reedswitch part 2 that sucked, so i went for the simple approach, and i got my rotor motor to run longer then normal, sofare atleast 1 hour, without recharging on 1 and/or 2 batteries. but here im testing only the ways to run a magnetic motor/rotor on Batteries without a transistor circuit


So i gues i cant call this a Bedini motor or can i ?


but i think the main reason we are all trying to do to is find a way to get more power/energy, then that goes in right ?

here is my latest vid with my homemade magnetic switch part 3
YouTube - homemade magnetic switch speakerwire 2 batteries part 3 JB


these next days i will order a real Bedini transistor so i can make it run of batteries, without my magnetic switch.

Question: Does a Bedini circuit empty bateries when it hooked up to a circuit without a spining magnets.

my own works when the magnet passes the magnetic switch it turns on the power/completes the circle pushes the magnet, and shuts off again

sometimes 1 spark is made while the disk has made 1 or more rounds (and a spark is supposed to make a spark every quart cycle on the disk)
whereby in a way that saves more power/energy, but a receiving coil still picks up energy in that round while no energy/spark is used

and while im seeing a spark, could i capture that energy in a capacitor ?

and while i have being testing wrong transistors, some got hot, could we not also use the heat from a transistor,to turn it into energy (correct me if im wrong, galvanic element - in Dutch Galvanisch element) ?
atleast turning heat into power


Greets JB

[Xenomorph]

@JohnnBlade:

Just use any NPN transistor like 2N3055s, 2N222s or even BC540 for a start.
If the circuit is not in resonance then it does not use any power (pikooamps maybe as transistor resistance is ultra high) when the magnet is not moving (I have no on/off switch on it) as only then the transistor closes the circuit.

Peltier or galvanic elements have been used by Lidmotor but in relation to induction of CFLs.
The problem is that you need a big temperature difference for it to yield a significant output but the heated up components also heat up the environment around them unless you run your circuit in winter and stick the element to the cold window

I have not seen the transistors in this circuit heat up noticably because they dont dissipate much energy (in my case 1.2 V at 5ma is not much energy)
The guys that run it at 9 or 12 V might have it heat up a bit though.

I am currently trying this circuit:



I need to make a trifilar coil to absolutely verify that it is not really doing what i is supposed to do

Reedswitching does not feed enough power back to the source while isolated from the winding of a pickup coil which can charge a 3rd battery no problem.

YouTube - LowRPM

[JohnnBlade]

@JohnnBlade:

Just use any NPN transistor like 2N3055s, 2N222s or even BC540 for a start.
If the circuit is not in resonance then it does not use any power (pikooamps maybe as transistor resistance is ultra high) when the magnet is not moving (I have no on/off switch on it) as only then the transistor closes the circuit.

Peltier or galvanic elements have been used by Lidmotor but in relation to induction of CFLs.
The problem is that you need a big temperature difference for it to yield a significant output but the heated up components also heat up the environment around them unless you run your circuit in winter and stick the element to the cold window

I have not seen the transistors in this circuit heat up noticably because they dont dissipate much energy (in my case 1.2 V at 5ma is not much energy)
The guys that run it at 9 or 12 V might have it heat up a bit though.

I am currently trying this circuit:



I need to make a trifilar coil to absolutely verify that it is not really doing what i is supposed to do

Reedswitching does not feed enough power back to the source while isolated from the winding of a pickup coil which can charge a 3rd battery no problem.

YouTube - LowRPM

Greets XenoMorph,

1e off all, thank's for the inspiration you share, with me, and hopefully others

Im about to order 5 x 2N3055
http://media.conrad.com/xl/1000_1999..._00_FB.EPS.jpg

(not sure about the S), and some new magnets, and coil wire - and then ill hopefully spin my sphere as before and get more then 2.5/2.7v - instead of using a disk

Question:What is CLF's in 1 centence if possible or tell me what to Wiki ?
what is a trifilar coil, is that like the bedini coil, but with an extra generator/receivercoil arround to produce more volt in series. or more amps in parralel ?, and would it not maybe act as an transformer.

if i could make this disk run of patatoes Patatoe battery - Windows Live /

water (Joke and serius), and solar power
and then charge a battery, would that be overunity - if only volt and amps is 1% higher then input - would that brings the last question to - how long/would it/can run ? - just yr thought


Greets JB

[Xenomorph]

@JB:
The TO-208 3055s from Conrad are nice, i got them too.
They are most easy to put into experimental circuit boards
and near impossible to destroy.

CFL means Compact Fluorescent Lamp.
I am sure Lidmotor can tell you more about Peltiers, i dont wanna elaborate on something he knows better, you can check his video out here :
YouTube - Peltier charging on a CFL Joule Thief

A trifilar coil has 3 windings which can be used for whatever you like.
Bedini has used the tertiary winding for collecting energy for instance in the Monopole Motor to pulse it into a battery.

The transformer effect of the winding is less significant than the induction from the passing magnet (s)

Pirate has already run his OMNB motor off an earth battery which makes most sense as it does not deplete like potatoes,water batteries, lemons etc.

Overunity is entirely dependant on the COP of your system and less dependant on your choice of what to put on the input side (lemons, solar etc.)

An open loop system allows the incorporation of energies that you havent paid for like sunpower.

I have worked with salt water batteries and they depleted pretty quickly, its fun to learn about batteries, but not really efficient.

If you wanna go for cheap (no cost) energy input go for solar or earth batteries (consult Pirate for that one)
That could hypothetically run a long time until your components fall apart.

I like your reed design by the way.
It seems robust and wont fry after a few days use like the ones i used

[JohnnBlade]

@JB:
The TO-208 3055s from Conrad are nice, i got them too.
They are most easy to put into experimental circuit boards
and near impossible to destroy.

CFL means Compact Fluorescent Lamp.
I am sure Lidmotor can tell you more about Peltiers, i dont wanna elaborate on something he knows better, you can check his video out here :
YouTube - Peltier charging on a CFL Joule Thief

A trifilar coil has 3 windings which can be used for whatever you like.
Bedini has used the tertiary winding for collecting energy for instance in the Monopole Motor to pulse it into a battery.

The transformer effect of the winding is less significant than the induction from the passing magnet (s)

Pirate has already run his OMNB motor off an earth battery which makes most sense as it does not deplete like potatoes,water batteries, lemons etc.

Overunity is entirely dependant on the COP of your system and less dependant on your choice of what to put on the input side (lemons, solar etc.)

An open loop system allows the incorporation of energies that you havent paid for like sunpower.

I have worked with salt water batteries and they depleted pretty quickly, its fun to learn about batteries, but not really efficient.

If you wanna go for cheap (no cost) energy input go for solar or earth batteries (consult Pirate for that one)
That could hypothetically run a long time until your components fall apart.

I like your reed design by the way.
It seems robust and wont fry after a few days use like the ones i used

Hi Xenomorph,

thank you, and so now
im good with the transistors.

and with a joule thief
YouTube - simple joule thief amp amplifier 1 x 1.5 AA battery and 1 to 5 and 7 LED'S - extra energy - JB
is it the same thing, amplifieng the amps you already got
i made one and im still using it (and 4 my son, for his night light )

when i used it with my circuit, rectifier and joule thief i got more amps from my coil to light up my LED, from 0.10v avg max (from the coil) till 2.7v max and amps to light a LED
YouTube - one magnet no bearing Bedini self starting got higher voltage reached 2 volt - JB

and i used allot of capacitors to store all the extra charge
when the meter was hooked on the circuit it also had a much lower reading then when my multimeter was not hooked on for some time and then reading so my meter also eats some energy/power

then when i was takin my cables apart for the next xp, and my meter was still hooked on, and i only removed 1 cable from 1 big capacitor i got like 13v and slowly going down to 4 volts, i did nothing the the reading went up from 4 to almost 12v again then i took the 2e capacitor away and the volt dropped again. have u had that ?


thnx

Greets JB