Bedini 10-coil

[Bit's-n-Bytes]

Hi Bits,

Your build is looking really nice

Could you please tell me if you onlty have a single trigger circuit? or do you have a trigger for each coil

Thanks

K-

@Mog, Thank you, just a single trigger.

Bit's

[robbie47]

Isn't the Tesla switch not just another inefficiency part?
The 10 coiler should provide the energy that it takes to read OU, right?

[Bit's-n-Bytes]

Isn't the Tesla switch not just another inefficiency part?
The 10 coiler should provide the energy that it takes to read OU, right?

No, there is a lot of "Magic" that occurs with the TS.

Bit's

[Mark]

Thanks for the diagram Bits. How many volts are in the run cap when the 10-coiler is operating. Or how many volts are you powering the 10 coiler with. And are you running it on all 10 coils?

Did John or Rick give you some guidance on how to use the transformer in your setup, I remember someone talking about it on the Tesla switch thread.

Anyways awesome job!! Congrats and thanks for all your input and hard work.

Mark

[Bit's-n-Bytes]

Thanks for the diagram Bits. How many volts are in the run cap when the 10-coiler is operating. Or how many volts are you powering the 10 coiler with. And are you running it on all 10 coils?

Did John or Rick give you some guidance on how to use the transformer in your setup, I remember someone talking about it on the Tesla switch thread.

Anyways awesome job!! Congrats and thanks for all your input and hard work.

Mark

The run cap has about 20.2 volts during a run with all 10 coils on line and for the guidance, none received from John or Rick. This is my own design and test setup.

Thanks again.

Bit's

[minoly]

The run cap has about 20.2 volts during a run with all 10 coils on line and for the guidance, none received from John or Rick. This is my own design and test setup.

Thanks again.

Bit's

Isolating the battery from the run side this way is genius is it the transformers, or the inverter, or their combination that does this?
We'll be interested to see what you end up w/ for your inverter ckt. Thanks for sharing all this
Patrick

[SkyWatcher]

Hi folks, Hi bits, nice work so far and thanks for sharing. Hi JuJu, I think if you can understand that at the most basic base line of these devices is getting back up to 95% of what you put in and that is very significant for energy saving and running something much longer by swapping batteries. Now what Bits is doing is the advanced version coupled with a Tesla switch where we've got our cake and can eat maybe some other cakes also, lol. Nobody is ever right or wrong, just different perspectives on things and this ends up either serving the greater needs of all or not. I still would like to know for sure what was driving Rick F's lawnmower wheels. I think it is possible he was using the monopole geared down to drive the lawnmower wheels, though it would be nice to have a solid confirmation on that. Great work though everyone.

Tyson

[redrichie]

Ive watched the Rick F video multiple times now. I do truly believe that the device was propelling his lawnmower. And I would also suspect that it is geared down. At one point he pushes the "clutch" and the rotor speeds up. A lawnmower is belt driven. When you press the clutch it pushes a pulley away from the drive belt, thus letting the rotor speed up. I dont think he is trying to fool us. Or are you saying that the Monopole is charging batts and maybe an elec motor is driving the mower?
Lets also not forget; there are 10 or so coils on this rotor and they do not even go halfway around it!. It is twice as big as the 10 coiler. The flywheel from that rotor has got to be much greater than that of a standard 10 coiler. Especially if it were being designed to drive something, instead of only be an energizer. Rick even said in the email the video was attached to that he didnt even have the coils adjusted for torque. Torque. One of the things that all the naysayers have been complaining about.
If I remember correctly Bedini has kind of been alluding to this through EFTV videos. In one of them I heard him say "If I only had a mass right here" He hints at a lot of stuff in those videos. He is a VERY smart man. How many of us hold multiple patents? Not me for sure. If he wanted to just show us he could have and we would have learned nothing. But instead he did it the way he did, and we experiment. And if nothing else at the end of the exercise you can say I built something and I learned a whole lot about science.

[ozotik]

Free energy?

Hi, if i buy this instead bateries i can use it for the lights of my house? and it will still going to work giving me more energy?
because i was building one of the bedini's motors with that pourpose and also to see how it happens.

[SkyWatcher]

Hi redrichie, i'm only wanting to know whats driving the wheels for ideas on a what i might build next. Its either a normal motor driving the wheels with batteries charged by the monopole or its the monopole driving the wheels and charging the batteries, just wondering which it is. I have no doubts about this technology, i understand the process as explained by John B., of course implementing it as well as he does is another thing. I honestly think that if we build a huge rotor, like using a large wood dining table or something with magnets on periphery that we will start to tap more potential from these machines. I think the mass of Rick's monopole is no accident, even though it is horizontal, gravitational/inertial energy is lead out from that massive rotor, due to the pulsing. There are too many people with similar accounts for this to be coincidence.
peace love light
Tyson

[juju]

hello

Hi, if i buy this instead bateries i can use it for the lights of my house? and it will still going to work giving me more energy?
because i was building one of the bedini's motors with that pourpose and also to see how it happens.

if your device would be similar to bites&bytes one, maybe you will get lucky!

hugs

[Plazma]

Finally . . .

@Bits - nice build - glad to see you on this leg of the forums - should be really interesting going forward . . .

@All - I finally got the rest of the electronic parts (at least I hope everything is there) last week after putting everything on hold for so long just waiting - so at least maybe a couple of us will start posting results in time.

I am in the middle of adding a separate test room to my lab facility so as to better manage all the work I envision using the 10-coiler and other related sub-assemblies including a test stand for piping in about 500 watts of solar for front end testing.

Like Bits has intimated, I too have ideas/concepts to test both on the front end power to the 10-coiler and I have a completely different objective in mind on using the enrgizer's radiant flux for downstream applications, beyond just charging batteries, per se. Containment on some of those envisioned experiments is why the construction cycle that I am in at present ref additional lab space ( and safety considerations) as well as EMI shielding/containment.

As soon as the lab is finished I will proceed with my 10-coiler build, later this month.

All the Best,

Plazma

PS - the 10-coiler is NOT a toy - I'm not investing considerable funds on lab space to stage toys but looking for serious radiant flux production for other purposes which will be divulged at the appropriate time.

[redrichie]

Can NMH, Li-Po batteries be charged from these systems?

[sucahyo]

Can NMH, Li-Po batteries be charged from these systems?

IF the battery do not contain circuit/chip yes. Unfortunately most Lithium have circuit. Becarefull not to over charge LiPo. Use battery bunker since LiPo can explode and burn everything around.

[John_K]

Hi gang

Man, have I been living under a rock !! (Actually in Adelaide - same difference...ouch )

Thx to YT's 6 day delay of subs updates I got Bit's video on the "X-coiler" (I like whoever named it that, kind of has a Scully & Moulder feel ) and read through the whole thread - yes, even the flame war, but let's not go back there, eh?

Just wanted to say great work Bit's and keep goin' man. I'm now subscribed to this thread so EF will tell me of updates.

Quick Q @Bit's - when are you going to add some Tesla Impulse Tech to your X-coiler? Then you'll have the full JB ensemble.... just kidding! (Sort of)

Need sleep, bye..


John K.