r-charge / bedini - solar power charger

[John_K]

Back on topic

OK folks,

The R-Charge Tesla Solar Power Amplifier (TSPA) has been on the market for some time now and I guess a lot of people have bought one.

I'd like to hear some feedback from the people that have one.

What model do you have? Likes? Dislikes? Any issues?

I've posted on this thread some of my feedback so far, but to save you from trudging through the thread...

I have a 10A model. I'm using a 24V 200W PV to charge a 12V bank. This configuration I think works the best, as it makes good use of low ambient light conditions. It comes on as soon as it is daylight and will put a charge into the batteries until the sun goes down - rain, hail or shine.

I haven't done any comparitive testing against any other type of charge controller, but I am pretty happy with its performance so far. I haven't tried to rejuvenate any junk batteries yet as I have other "home brew" chargers/rejuvenators that do a great job of that.

All in all, I'm pretty happy with it.



John K.

[sucahyo]

Seamonkey, I am expecting you to show video for a timer driven radiant circuit that reduce current consumption with a load like a battery. Can you post the video?

The only clue you mention is:

If the base drive (in the case of a transistor) or the gate drive (for a MosFet) can be stabilized and isolated from loading effects then the current draw of the circuit should be minimal under load.

And then:

In order to protect the transistor or MosFet from damage it would be necessary to always have a "load" connected to the circuit in order to safely dissipate the Radiant Spike.

When such a circuit is operating into a "load" the current draw from the source can be quite small. Then, if the "load" is disconnected and the Radiant Spike is permitted to assume dangerous proportions the transistor or the MosFet would function erratically and the current draw would increase until the device destroys itself. This destruction may occur suddenly or it may take several minutes during which time the transistor or MosFet would get very hot.

I never see a circuit that can do that. Can you at least provide a diagram of
"such a circuit"? I am expecting radiant circuit, not RF amplifier.

BTW, my transistor on previous video is TIP31C & TIP32C with rating of 100V. It can lit neon bulb with voltage reading at 380V. Without load it may be go beyond 1000V, surely already way beyond their spesification.

r-charge is a model for anyone trying to build their own radiant charger. They will read this thread sooner or later. so providing correct information is important. And I think you, Seamonkey, provide wrong information.

[SeaMonkey]

Seamonkey, I am expecting you to show video for a timer driven radiant circuit that reduce current consumption with a load like a battery. Can you post the video?

The only clue you mention is:


And then:


I never see a circuit that can do that. Can you at least provide a diagram of
"such a circuit"? I am expecting radiant circuit, not RF amplifier.

BTW, my transistor on previous video is TIP31C & TIP32C with rating of 100V. It can lit neon bulb with voltage reading at 380V. Without load it may be go beyond 1000V, surely already way beyond their spesification.

r-charge is a model for anyone trying to build their own radiant charger. They will read this thread sooner or later. so providing correct information is important. And I think you, Seamonkey, provide wrong information.

The Radiant Circuits to which I refer are indeed
battery charging or rejuvenating circuits.

The Inductor is heavy wire with a very small DC
resistance. Inductance (ferrite or powdered iron)
ranging from 100 uH to 500 uH.

The Pulse Width has been "tuned" to maximize
the energy content of the Radiant Spike.

Each Radiant Spike is capable of delivering more
than 30 Amperes to the battery being charged
or rejuvenated. In some cases the intensity of
the Spike can approach 100 Amperes.

This is with a MosFet circuit powered by a 12 Volt
source.

If your circuits are "surviving" exposure to the
unloaded Radiant Spike then either:
(a) the Spike has little power
or
(b) the impedance of your coil is very high
which prevents the spike from being destructive.

When operating Radiant Circuits which have been
optimized to produce very powerful Spikes it is never
a good idea to remove the load.

[Mark]

How can this be said any simpler Seamonkey, SHOW US THE CIRCUIT!!!

[nvisser]

What is wrong with you people. The man probably dont build circuits anymore as he built this things already with valves before transistors was available and as he stated there was no video cameras then. He has posted a good circuit on this forum .Just go search for it and built it.
I also posted one that he helped me with.
http://www.energeticforum.com/renewa...sulfators.html

[SeaMonkey]

What is wrong with you people. The man probably dont build circuits anymore as he built this things already with valves before transistors was available and as he stated there was no video cameras then. He has posted a good circuit on this forum .Just go search for it and built it.
I also posted one that he helped me with.
http://www.energeticforum.com/renewa...sulfators.html

That would be a good place to start.

Frankly, the topic here deserves to be "restored" to
the subject at hand - the Bedini Charger.

All questions related to other Radiant matters are
best handled in other threads. No need for any more
"distractions" here.

Your cooperation will be greatly appreciated.

[Mark]

Hello John K

The last I heard the solar charges were all sold out do you know if they are readily available again?

Also Aaron posted a while back about a new product coming out but no one has elaborated about it, any news on this product yet. What is it and when will it be on the market to purchase?

Thanks Mark

P.S. I am looking into the possibility of rejuvenating 6 volt golf cart batteries and am wondering what would be a fair price to charge for the service. Is anyone currently doing this or what are anyones thoughts on the charges for this. The gold course that I am a member at currently sells there "used up" batteries to a scrap yard for $18.00 dollars. My thoughts were somewhere in the $50.00 to $75.00 range.

[sucahyo]

What is wrong with you people. The man probably dont build circuits anymore as he built this things already with valves before transistors was available and as he stated there was no video cameras then. He has posted a good circuit on this forum .Just go search for it and built it.
I also posted one that he helped me with.
http://www.energeticforum.com/renewa...sulfators.html

He post wrong information. Would your circuit work like SeaMonkey describe? Current consumption reduce with load? Or the way he put it, draw an insane amount of current without a load?

Has anyone tested the draw and input current for these units?

I would love to know that too.

[Aaron]

new product

Hello John K

The last I heard the solar charges were all sold out do you know if they are readily available again?

Also Aaron posted a while back about a new product coming out but no one has elaborated about it, any news on this product yet. What is it and when will it be on the market to purchase?

Thanks Mark

There have been a couple varieties of chargers
based on different switching methods and one that was already being sold
was one that I thought was new. There are so many developments
happening out there it is hard to keep up on them all and EnergenX will
probably be the first to post about anything them in the press releases
on their homepage.

John has some * EXCITING * things cooking and it is related
to the chargers. Any news or details will be theirs to tell and again will
probably be posted on the EnergenX homepage and of course all the
dealers pages when info is released.

I wish I could say more at this point.

[Tassie Mike]

Hi Aron and all!
Lots of good thoughts going on!

I am NOT talking about Banks or Banking here --Just want to see if I can rationalize some of the thinking here :-)
"A truth's initial commotion is directly proportional to how deeply the lie was believed. It wasn't the world being round that agitated people, but that the world wasn't flat. When a well-packaged web of lies has been sold gradually to the masses over generations, the truth will seem utterly preposterous and its speaker a raving lunatic."
~~~Dresden James

Beware of the "FACTS" told to you by Governments, Banks, Scientists and Big Companies, be prepared to to use your grey matter!

There are things happening right infront of you, right now.

Do you think it is right that Banks should charge you for the privilage of withdrawing YOUR money?


I really hope you can see my point about thinking here
Cheer all

Mike in Tassie

[Tassie Mike]

OOPS

Sorry Aaron :-( !! :-)

[SkyWatcher]

Hi folks, Hi Tassie Mike, yes please start a new thread along those lines of thinking, it will take off like a rocket with many these days suffering in some way due to these imbalanced systems that have been in place for some time. Many here already know what you speak of is directly related to energy devices and its dissemination.
peace love light
Tyson

[Aaron]

golf cart batteries

P.S. I am looking into the possibility of rejuvenating 6 volt golf cart batteries and am wondering what would be a fair price to charge for the service. Is anyone currently doing this or what are anyones thoughts on the charges for this. The gold course that I am a member at currently sells there "used up" batteries to a scrap yard for $18.00 dollars. My thoughts were somewhere in the $50.00 to $75.00 range.

Mark,

If you're not locked in or completely dedicated to just rejuvenating them
for the golf course, I have a couple of ideas. Let me know and I'll post them
here.

[Aaron]

new thread

He post wrong information. Would your circuit work like SeaMonkey describe? Current consumption reduce with load? Or the way he put it, draw an insane amount of current without a load?

I would love to know that too.

Sucahyo,

SeaMonkey started a thread here to address your questions:
http://www.energeticforum.com/renewa...iscussion.html

[Mark]

Mark,

If you're not locked in or completely dedicated to just rejuvenating them
for the golf course, I have a couple of ideas. Let me know and I'll post them
here.

I'm all ears Aaron fire away!

Mark

p.s. Are the solar charges back in stock again?