Bedini Ferris Wheel Regauging Motor

[mklimesh]

I got just the wheel 2 or 3 years ago. As I remember it was around $50 with shipping.

Mike Klimesh

Does the shovel work good, just watched the video? We're getting a bit of snow here in Michigan. Did you disassemble your shovel or can you purchase the wheel seperate?

Thanks, Mark

[Rl2003]

David,

Nice work on the drawing, that must have taken a little time to do.
While your making your corrections, there is one more slight change.
The star motor as you call it has ten coils, five are slightly off from the
other five. If I had to guess I would say about 2.5 degrees, but John
would know more percisely. The magnets stay like they are. At least that
is the way I saw it to be.
Mark P.

Hi all,

I just saw a few stupid mistakes on the drawing sorry I will change them and re-upload .

David Brown (belfast)

[Aaron]

Radus Boot & Star Motor Concept

New video that may be helpful

YouTube - Switching Permantent Magnet Field.wmv

@Everyone - Cody,

Cody, just talked to John and you got it right on! That is how it works.

That is the Radus boot and star motor concept.

[woopy]

Hi all

some update

i am at the present , some problem with all this stuf

so i made the part 4 of my video serie

hope this do not disturb

do not esitate to say me that i have to open a new thread about
it

good luck at all

Laurent

thttp://www.youtube.com/watch?v=eG1Xerx5Xeg

[citfta]

Great video!

Thanks Cody,

That video made it much easier to understand. You made it look so simple.

New video that may be helpful

YouTube - Switching Permantent Magnet Field.wmv

Thanks, Carroll

[woopy]

[QUOTE=woopy;121703]Hi all

some update

i am at the present , some problem with all this stuf

so i made the part 4 of my video serie

hope this do not disturb

do not esitate to say me that i have to open a new thread about
it

good luck at all

Laurent

YouTube - pulse motor withh PMH armature test 3

[cody]

Aaron,

Thats good news, thank you for letting me know. I have an idea on how to properly apply it as i dont think my switching i posted above was correct, and i think John was trying to point this out earlier. More to test.

cody

[Aaron]

Pole Splitter

Hey all. I just got through reading Davis's manual of magnetism. It took all evening...i know i missed lots, but I believe its safe to say Ed had this book! And I'm pretty confident he done 95% of the experements in it. There is a machine on page 80 something that resembles his wheel. Has to do with an experiment that shows how magnets will rotate around a wire carrying current/vise versa. There is also lots of explanations of pmh's, and one that he calls a pole splitter. Maybe this is whats missing from ed's shop. This book really suprised me by all of the experiments in it, all having to do with magneto electricity. Ed's machine may be a magneto. Good book!!

Cornfused,

If you have the time to go back through the book and list the page
numbers of these, especially the "pole splitter", might be able to share
some more with you in this thread. Pole splitter, if the same is not
just a clue, it is a necessary key. Might be able to share more after
you can post the page #'s for that.

[cornfused]

Cornfused,

If you have the time to go back through the book and list the page
numbers of these, especially the "pole splitter", might be able to share
some more with you in this thread. Pole splitter, if the same is not
just a clue, it is a necessary key. Might be able to share more after
you can post the page #'s for that.

Aaron,
I did have some time this morning, and these are a few pages that stuck out.

Page 96 Paragraph 162-Page's revolving ring. Fig. 67

Page 97-98 Paragraph 163. Fig.68

Page 98-99 Paragraph 164 Fig. 69

Page 99 Paragraph 165- Page's rotating multiplyer.

Jason.

Page 84-89 Paragraphs 139-149
MOTIONS PRODUCED BY MUTUAL ACTION OF MAGNETS AND CONDUCTORS

Page 157 Paragraph 274 Fig.100

These are a few that stuck out. Anyone that may want a better understanding of magnetism may want to have a look at this book...

[Turion]

The wheel I made using a 22" steel bicycle wheel with 8 "spokes" around the outside of it made of 3' threaded rod turned out GREAT. If you decide to go that route, use 1/4 inch plywood for the "wheel" rather than plexiglass. The plexi worked ok, but it is too easy to crack and break. The holes on the outside wheel ended up being 18" apart, which was really easy to drill once I had it figured out. Will post a picture or two once I get all the magnets glued in place and it's ready to hang. Got the bearings all cleaned out and replaced, so just need to mount it. I'm hanging it from the ceiling joists in my basement and it will be about a foot and a half above the floor, which barely gives me room to get my coil under it. The wheel is about a six footer.

[John_Bedini]

Bedini GT3

Just a few people got to view what I'm going to talk about I had to return everything so don't ask for anything at this time. I know that the questions are going to be asked I will do my best to answer.

I have some permission to talk about ED and some of what was found.
Ed and his generator is not what we all expected, however it does follow the Monopole with one very big difference. ED's generator is the real thing using real monopoles not this theory that science is looking for.

How do I know this because it was measured. For example if you had and could make a real monopole it would be hidden to the instruments we have today except for one thing. It would be magnetic and would detect magnetic with a real magnet but not any other electronic device. A hall device would not see it. The energy must have two flows otherwise it can not be measured with the instruments we have. ED left clues all over that castle in junk piles. Another example is a statement where he said it would be good for your electricity too, is his different some how? ""Magneticity""

Imagine that real monopoles floating around us all the time and we can not detect them because were not looking with the right things. The earth is one of those things.

The people cleaning up would just call all this junk and nail it up on boards and put his tools in a pile never checking for anything but Money in a tin can. ED did not need any money because he had the key to the universe so why would you need Money. He did not need any electricity either for the simple reason he could just setup his machine and have all the light he wanted, (Machine missing from property, so ED did something with it before he left.) It probably got turned into a junk pile.

Now one example is the gate that had to be fixed ED used a rock to support the bearing on when the analyses returned it said not of this world, what does that mean. That would have been a good indication that ED somehow made that rock with real magnetic monopoles to make it that material by flowing something by it. Transmutation of the elements, and yes unkown elements have been found and gated off.

On one of his Junk boards at the castle sits a U shaped piece of metal it's not a real magnet as we know it, it's a one pole magnet South and no measurable North with a Hall detector no matter where you put it, it just looks like an iron pole.The thing that does measure it is a real magnet as it repels from that pole but you can't measure it with electronics. That magnet is not of this world either.

Now sitting agents the wall is another one of ED's perpetual motion holders you would think is dead, think again it also only has one monopole South in-fact all ED's Magnets with hidden poles are South magnets only, all north poles can not be measured electronically but can be measured with a magnet . Everything at that place is indicating that ED could make real Monopoles unheard of here and now. If you could change the magnets flowing in things you would have different materials and a different electricity and Gravity.

One other clue here. ED said that the magnetic streams could be split and if guided in the proper channels become perpetual in flow so we do not need anything spinning, do we. More later as I think of it.
I'm just looking at it from the technical end and not the Gravity even if I think it's all one and the same thing.

Aaron if you would like to add to this it's ok.
Chuck H if you want to add it's ok.
John B

[Aaron]

monopole permanent magnet

It is one of the trippiest things I've seen - anyone that thinks there
can't be a monopole magnet - and a permanent magnet monopole at
that, think again!

There is actually a lot I could say about this but for now, all I will say
is that what a lot of this proves is that John is right again! lol

Anyway, there is a lot to asymmetry as that is the only way potential
can really move and when you have a monopole, you can't get any more
asymmetrical than that. And if there is no equal opposite - it can't
really ever equalize can it? And after so many years too. Amazing!

Monopole permanent magnets!

It's getting interestinger and interestinger

[Turion]

When you think of the limited resources ED had to work with...magnets, electricity, wire of different kinds, heat, it is amazing that nobody has stumbled upon the secrets he had before now. I guess it is time to get back to some basics, re-read everything Ed wrote, and begin experimenting to see what we can discover about Magnetricity.

[Aaron]

@Jason

Aaron,
I did have some time this morning, and these are a few pages that stuck out.

Page 96 Paragraph 162-Page's revolving ring. Fig. 67

Page 97-98 Paragraph 163. Fig.68

Page 98-99 Paragraph 164 Fig. 69

Page 99 Paragraph 165- Page's rotating multiplyer.

Jason.

Page 84-89 Paragraphs 139-149
MOTIONS PRODUCED BY MUTUAL ACTION OF MAGNETS AND CONDUCTORS

Page 157 Paragraph 274 Fig.100

These are a few that stuck out. Anyone that may want a better understanding of magnetism may want to have a look at this book...

Thanks Jason!

Are any of those the "pole splitter"? That is what is most intriguing
about what you mentioned before?

John just posted: "One other clue here. ED said that the magnetic streams could be split and if guided in the proper channels become perpetual in flow so we do not need anything spinning, do we. More later as I think of it."

If there is one thing to search for in that book at the moment, it would
be the "pole splitter" to see if it describes any of Ed's methods for splitting
the magnetic streams.

[jerdee]

Thank you John,

In other words, we cannot see or detect these hidden streams with our instruments unless both magnetic streams are in motion. We only measure one side with our instruments and never use the other half as it is hidden from us! Now I know what to look for when I visit Homestead FL. VERY insightful post!!! Thank you!

Please forgive me if this is the wrong time to mention this, but wanted to show what I have learned from Cody’s post. I'm starting to see the two streams thanks to Cody's work!!

I have done the PMH with only magnets as well. You can do this with 4 pieces of hard iron, preferably cast iron, as it is the best, I've seen so far, and a simple ferrite. Could it be the cast iron crystal structure? One thing I've noticed in my research with this simple experiment, is the faster I close one side with a iron bar, the stronger the hold, as well as least amount of magnetic field on the flux path. I take this as, we need to switch these field fast!!!

From what I have learned we want to use the sequential bipolar circuit to regauge the magnetic fields for the Star motor/generator! I’m not seeing the highly modified aspects yet, but I wanted to get this out, to possibly get other people thinking more about this and of course learn. I hope I’m going in the right direction.

This circuit will teach us again how to isolate the battery as well as recover almost all the energy or recover to source or another load!
I see the switch as way to learn how you switch between regauging mode and generator mode.

I remember when you would switch off, the pulse would light up, and of course when in regauging mode you saw the two pulses. I only saw one hall switch for inner star generator/motor timing wheel, but in order to work with both streams we need two hall switches. One directly on the North pole!

We can recover the waste electricity after regauging to cap, I show battery for now, but cap as well. (Or drop input current down considerably when fed back to input). Experimentation will be needed to drop input current down further by switching out R3 and R8 for possibly higher ohms. Just not quite sure yet, but I need to get this out for people to possibly learn from.

Also we need to create asymmetrical fields across the PMH windings!! Monopoles!!! The least amount of reluctance from the asymmetrical shaped poles the better! We want to shape the fields to be strong when regauging back and forth.



I hope I can speak for us all, we are all very encouraged by your posts. The excitement is for sure building!!

All the best,
Jeremy Burnum