Bedini Ferris Wheel Regauging Motor

[phishy]

Phishy,
Good now that you have done that. it's time to collect the charge and start dumping to the second battery with a cap do not get mixed up it's about time someone else does that. Remember use the negative switching out of phase from the rotor a fet with a zener does just fine. If you find the signal is feeble then think about it the answer will come to you. Make sure it's sixteen poles all north adjust the timing wheel for the correct overlap dwell use round magnets and make the hall adjustable, then go away and run your house, not one more word needs to be said/ or go help others, get your machine ready your going to need it.. Get the machine bigger if you can. Good work on doing that.........
John

John,
thank you ever so much for all these pointers...
getting to work now...

best regards,
phishy

[John_Bedini]

Big Bedini Motor

uusedman,
I do not want to get into my theory here but 16 poles is ideal, before I talk about that go study all the drawings on code 144.com. I took all this stuff into consideration for this machine and now I can see what ED was saying, his generator is arranged with super poles, but his coils were iron wire.

He said I have generated more electricity with iron then copper. but The real clue was sweet sixteen and it's about the magnetic streams that come and go. It is depicted in the pictures of how it works but to use it you must create a imbalance in the streams. It's not what everybody thinks it is.

Researchers have been misinformed for a long time, even the best books you can buy like those on the Tom Bearden site as reference in magnetics could be just conditioning for the mind. I do not use it for antigravity like ED did I use the same waves for power. This is why I tied ED's work into the machine I had to find out for myself if it was true, and yes it is. ED may have been right when he called it magnetic currents going the same direction. More on this later. I never do anything without studying it first and running experiments. It's not what everybody thinks it is and it drives electrical engineers nuts.
John

Hi Guys/Gals,

Because I don't have a solid electonics background, I need to do things with my hands. So, I seen this huge fan laying around. It is about 5 feet with about 4 1/2 feet blade. I will remove the blades and that will be the back side of the Motor. I will have to place a longer shaft to which the longer arms of the wheel will be run on Master-Slave-Slave setup.

John a few questions regarding the Ferris, Thanks in advance for your open information and your curtoesy:

1. Ed had 24 poles as opposed 16 poles on your Ferris Wheel. Does it have to be 16 poles?

2. On a previous post of this forum you stated Chopping the pulse in a DC Motor, I don't remember seeing a DC Motor on the Big Ferris Wheel, did I miss anything?

3. Can this motor use a normal contact as you stated in the beginning of the book "FEG" with a commutator with three contacts? Does it have to be a hall sensor?

4. Does this motor utitlize a PMH in any sorty?


I have attached a pic of a wierd looking PMH from Ed's castle. When I was visiting 4 days ago, it caught my attention because I never seen anyone trying this setup. What is interesting is how the motor is inside of it.
thanks in advance.

Abe



The pics are the following

[John_Bedini]

Big Bedini Motor

Armagdn03,
Good to see you here sorry I did not get to talk to you at the conference.
John Bedini

[John_Bedini]

Big Bedini Motor

uusedman,
The contacts will fail and so will a relay......

Hi Guys/Gals,

Because I don't have a solid electonics background, I need to do things with my hands. So, I seen this huge fan laying around. It is about 5 feet with about 4 1/2 feet blade. I will remove the blades and that will be the back side of the Motor. I will have to place a longer shaft to which the longer arms of the wheel will be run on Master-Slave-Slave setup.

John a few questions regarding the Ferris, Thanks in advance for your open information and your curtoesy:

1. Ed had 24 poles as opposed 16 poles on your Ferris Wheel. Does it have to be 16 poles?

2. On a previous post of this forum you stated Chopping the pulse in a DC Motor, I don't remember seeing a DC Motor on the Big Ferris Wheel, did I miss anything?

3. Can this motor use a normal contact as you stated in the beginning of the book "FEG" with a commutator with three contacts? Does it have to be a hall sensor?

4. Does this motor utitlize a PMH in any sorty?


I have attached a pic of a wierd looking PMH from Ed's castle. When I was visiting 4 days ago, it caught my attention because I never seen anyone trying this setup. What is interesting is how the motor is inside of it.
thanks in advance.

Abe



The pics are the following

[Armagdn03]

Armagdn03,
Good to see you here sorry I did not get to talk to you at the conference.
John Bedini

I was going to say hi, but did not want to come off as another groupie,

Id more than love to chat however....ill send you a personal message with my email address.

[John_Bedini]

Big Bedini Motor

Jeremy,
Yes John Depew is right and so is code144.com this is the way all energy works, the unseen forces that surround us every day, the sixteen poles is the best as soon as somebody figures it out here, I'm waiting for the answer.
The wheel represents something very important.

John

John,

I had an unbelievable revelation tonight.

I see the shaped field as differentials of scalar potentials. Interferometry ZERO wave!!!

The energy is at the differential of potentials zeros. This is between the asymmetrical bloch wall of the in phase base coils vs the asymmetrical bloch wall of the magnets!!!



Once I saw that the 10 coil re-gauging motor/generator fields are NOT interacting with the IN PHASE base coils it became clear!! This led me to understanding why you were able to use much smaller neo magnets!! And be able to use the center axle in generator mode…out of phase!!! Capture the energy with no current.

You are shaping base coil field at the bottom to create a larger south pole. Therefore the iron flange and outside extended cores do several things:

- Creates one huge asymmetrical field pulling the bloch wall DOWN!!!
- Forces the Zero point to be asymmetrical across all three coils
- Flange Forces the Zero point to be SPREAD OUT MUCH WIDER!!! Wider window for the energy to come in!!!!

With that said, we know can look at the neo-tipped asymmetrical field as pulling the NORTH back!! This does several things as well:

- Creates another asymmetrical field pulling the bloch wall UP!!!!
- Forces the Zero point to be asymmetrical across the magnets.

You are basically dealing with two sets of non-linear bloch walls that create differentials of potential that are pumped in interferometry mode. As Bearden would say, this is where the REAL VECTORS ARE!!!! Not taught at at University!!!

So John Depew is RIGHT!! We only want to deal with the magnetic currents only and create the largest differential of potentials!!!

This is a pumping zero field of two differentials out of phase in the same frame of TIME!!! Time Wave.

We now have two opposed differential potentials pumped! The hall switch triggers the half bipolar bedini/cole circuit @ 23 degrees after. Again pay nothing for the switch!!!

Simply UNBELIEVABLE work John!!! I’m eternally grateful for all your hard work!!

All the best!!

Jeremy Burnum

[redrichie]

22.5=9 sorry couldnt help myself.

[John_K]

Jeremy,
Yes John Depew is right and so is code144.com this is the way all energy works, the unseen forces that surround us every day, the sixteen poles is the best as soon as somebody figures it out here, I'm waiting for the answer.
The wheel represents something very important.

John

The 16 magnetic streams that surround the Earth?


John K.

[John_Bedini]

Big Bedini Motor

Mark,
Think, the rods go through the bottom, now think what happens when you break a magnet into smaller pieces. Can you have a south pole and a north at the same time from one magnet where the shield intersects ? The rods are 2 inches down into the wood. you only need the coil form bonded to the shield. can you have a smaller south and a big south?
John

John,

I am building a small working model of the BFW, and know that you have said several times that the core rods go thru to the sheet metal. My question is touching sufficient, or should they be bonded to it with an epoxy or a conductive substance?

Mark

[Aaron]

magnetic streams

The 16 magnetic streams that surround the Earth?


John K.

There is someone with an electromechanical battery (similar) on a magnetic
bearing setup that taps those streams (to my understanding). It is self running on
magnetic current. But he calls it an Earth Frequency "generator."

But in his model, he sees a magnet with 9 magnetic poles. 8 and then 1
virtual - something like that.

I thought for years it was running of the "simple model" of the Earth's
magnetic field.

[Rl2003]

John,
Yes, I see it better now. Thank you.
I did not catch that detail of the core thru the wood by two inch's.
I have built machines for automation and I can take them appart in my sleep, and I am sure this is blue printed in your mind.
I am tring to get a grasp of the simple complexity of this and I am greatful for all the help given.
Mark P

Mark,
Think, the rods go through the bottom, now think what happens when you break a magnet into smaller pieces. Can you have a south pole and a north at the same time from one magnet where the shield intersects ? The rods are 2 inches down into the wood. you only need the coil form bonded to the shield. can you have a smaller south and a big south?
John

[Aaron]

Code 144 and John Depew - Coral Castle

Just started this thread so people can get into in depth discussion
of the contents of Code144.com and John Depew's info in regards
to Coral Castle:
http://www.energeticforum.com/renewa...al-castle.html

If John doesn't think it will distract from this thread then just post
it all here and I'll delete that thread. Otherwise, please post in that other
thread.

Thanks!

[John_Bedini]

Big Bedini Motor

Aaron,
I will tie this all together when the question I asked is answered.
Then we will play with code 144. If this is ok with you.
John

[jgowen]

Sweet 16

Sweet 16, 2 "Stars of David" superimposed on eachother as has been used as the symbol of the sun for all time.

The 16 magnetic streams from the wheel correspond with the 16 streams of energy inherent in sunlight. But, "Go Below?" the meaning still escapes me.

Josh

Jeremy,
Yes John Depew is right and so is code144.com this is the way all energy works, the unseen forces that surround us every day, the sixteen poles is the best as soon as somebody figures it out here, I'm waiting for the answer.
The wheel represents something very important.

John

[nenergy]

leedskin inverse energy

ed leedskin generator, open collector coil when 5 magnets is precisely within collector coil and 1 magnet each is TDC over 2 exciter coils