Bedini Ferris Wheel Regauging Motor

[John_Bedini]

Big Bedini Machine

My question to this group,
What does ED's machine look like and what parts go in it? He told you about magnetic streams and how they work, you would never believe what it is. I know that some pieces are missing from his workshop never found but hidden somewhere. maybe in one of those big blocks of coral. What does it look like? I'm going to make one and will show it to Aaron.
John B

[alexandre]

Signor Bedini, this is off topic, but I must say something on behalf of many brazilians. We are ashamed of the keppe gang and their motor, which is clearly based on your work, that you generously shared, and they call it their own.

Truth will prevail

[Aaron]

@Mark & Ecoman

Erfinder deleted post was also out of line but Aaron you need to relax and not be so offended when someone doesn't agree with you. Erfinders original response did not deserve your demeaning comments.

Mark

His post was extremely condescending and demeaning. I make a post about
a recommended video and he comes in lecturing me on what I should or
shouldn't do? Preaching to me about honoring that video when I ALREADY
gave accolades about the math? Preaching to me about providing an
answer when pointing out something wrong when I ALREADY pointed out
what the image is in the center of the sun? Basically, from what he is
lecturing me about completely indicates that he did NOT even read what
I wrote! Therefore, if he wants to lecture me based on not even having
the courtesy to read what I wrote, the I will spell it out for him.

I have NO problem whatsoever when someone disagrees with me and if you
think I responded because he doesn't agree with me, you're very mistaken.
What I responded to was every point that I already made about him
not disagreeing with me but lecturing me to do things that I actually
included in my comment about the video - it is completely ridiculous and
is a slap in the face - it shows he selectively read and comprehended in
my post what he wanted to comprehend, which didn't even describe
my post, period.

@Aaron

I told you once and I'll say it again. Stop being a Free Energy Officer and learn to take criticism about your views. If you're a true spiritual entrepreneur and have some faith, you would trust that any objective views will eventually be ruled out once the free energy theories are proven.

I'm sure many would agree here that your defense mimics the preaching of a disciple. Get real man.

Ecoman

Criticism has nothing to do with posting a response to my post, which
is completely blind to the points that I have discussed already. Criticism
would have actually included a theme throughout his post that indicated
he read it.

"Preaching to me about honoring that video when I ALREADY
gave accolades about the math? Preaching to me about providing an
answer when pointing out something wrong when I ALREADY pointed out
what the image is in the center of the sun? Basically, from what he is
lecturing me about completely indicates that he did NOT even read what
I wrote. Therefore, if he wants to lecture me based on not even having
the courtesy to read what I wrote, the I will spell it out for him. "

I am nobody's disciple!

If someone wants to post something as ridiculous as preaching to someone
about several things they should do, when those several things were
ALREADY in the post that is being "criticized", it is not criticism, it is
stupidity and an insult to one's intelligence.

And objective views being ruled out once free energy theories are proven?
I've said it more than once and I'll say it again - THEY ALREADY ARE and
you prove my point about being able to comprehend what is ALREADY
written in this thread and throughout this forum. Once free energy
theories are proven? If you're waiting for free energies "theories" to be
proven, try harder to see what is in front of you - it's "hidden" in plain
sight.

Anyone else that absolutely feels the need to jump in on this, do everyone
a favor and keep it to yourself or have the courtesy to send me a private
message so this thread doesn't get cluttered up with a bunch of off
topic posts. Basically, I'll leave these posts as they are and any more
related to this posted in this thread will be deleted because it will just
contribute to derailing the topic at hand.

[John_Bedini]

Big Bedini Machine

Jetijs,
Look at ED's wheel you will see four pieces of Iron on the top that is what collects the Phi current 0 mass-less charge pure potential. What can you do with that?
Great looking machine now make it run. What is missing from the equation. You already have the source here 24 super magnetic poles ready to go. The Phi current can be taped if the rest of the machine is finished. The question again, What Is ED's machine, You all know I'm just not going to give the answer, I want you to think. ED was kind he left two things at the castle The wheel and what else?
Can I have the answer tonight or must I wait. Look at this as being in school the test is given.


John B

Hi John,
Which iron do you mean, that lets you collect the phi field?
Here is my wheel so far:

[Jetijs]

Oh, you mean the clover shaped metal ring, right? As far as I know, the two most important things Ed left were his 24pole flywheel and the perpetual motion holder. That is exactly what I am trying to combine here - to make a huge circular PMH using magnets. Will see what I can do about the clover shaped ring.
If anyone is interested, here is my picture gallery with all the pictures of my various Leedskalnin experiments:
Jeti stuff: Jeti stuff » Liedskalnins
Thanks John.

[Karl_Palsness]

I just wanted to point out to all the work that Jeremy is doing. It might not be clear to many that here he is showing what happens when you “ring twice”, you get a HUGE answer. When the magnets approach the outer two coils...the first one makes a pulse to the center coil then the other makes a pulse to the center coil causing a magnetic double ring! What does that do? In my opinion it removes the iron from the coil lowering its impedance making a lower henry coil, but just for a moment. In that moment the coil is fired; and little resistance is found by the inrush of electrical energy. But then a beautiful things happens, the coil collapses without the altered impedance state...now that it has huge impedance. The coil releases way more energy than it should compared to the energy input it received from the electrical hit it took. When you play with the impedance of the coil you are able to get an energy gain if done correct. We all know who else has taken advantage of that effect a few months ago on a little Island...There are also several other places you can find people taking advantage of this effect, but the way that our beloved pioneer here has done it, is outstanding.

John, I would like to hear your critique of Jeremy's post and show us how we can polish it even better or get a better understanding of what is going on here. Is he correct? We are learning so much from your work I can't thank you enough for the time you are taking to teach us. I know it takes a lot of energy on your part to just read all that is going on...not to mention all the time you take on typing back to us. Thank you!

The greatest honor a teacher has is when his students can teach the teacher and carry the torch to an even higher place, my physics teacher once told me. I just hope we honor you that way!

Ding; Ding;


Karl

PS: Class please stop the bickering it is distracting. Ever heard of PM's...work it out on your own not in the forum.

I want to discuss the principle of rotational magnetic amplifiers. I had to experiment with this principle, so I tried this....

• Take four wires, any size, but keep them same length and size for now. Keep this simple.
• Wind three wires as a trifilar coil and the fourth one by itself. The trifilar will be the Mag Amp. While the separate coil will be CONTROL. MAKE SURE TO NOT LITZ THE WIRES OR THIS EXPERIMENT WILL NOT WORK!!!
• On the Mag Amp coil, connect one power strand end to the top of the next power strand. This will be two power strands in series!! This will create high inductance on the windings!!! Measure the inductance of these windings and keep the LC meter connected.
• Now short the third available winding on the trifilar and measure the series inductance. It drops!!
• Now take the third winding ( control strand ), place it across a 9 volt battery and measure inductance.
• Flip the polarity on the 9 volt. What do you get? A gigantic inductance rise or lowering of the series power wires depending on 9 volt polarity. You can swing the inductance either way dramatically with very little input.
• Now connect the 4th single strand coil left to the third control winding instead of the 9 volt battery. This extra coil should be in PARALLEL to the control winding of the trifilar mag amp. Think of this as the impedance matched slave coils on the sides.
• Take a large Neo and slam it on top of the slave control winding! Guess what, you control the inductance to the Mag amp coil very easily!!! Both up and down!!! This all requires an A/C wave to control the inductance!!

Why is mag amp technology a lost art?! It's beyond me. BTW, the early marconi stations were based on Tesla's work with intense grounding (bolinas county, CA) uses Alexanderson's mag amp work!! I find this very interesting. Read Alexanderson's patents. Some of the earliest work of mag amps.

So here is a proposed wiring of the Mag Amp with Slaves windings in parallel. I have moved the diode close to the switch.
There is still lots of room for improvement here. For example, I do not show the capturing of the reactive impulse from the slaves as well as the axle generator. But this is a good start for all of us to begin and understand the process here. Thanks goes to Vissie and Matt for the SSR potential inverted switch. This sche is set for 12volts but can easily be set to higher voltage inputs and outputs.



Now imagine the Mag amp coil is pulsed in low inductance and released in high inductance!!! A rotating wheel self biases the mag amp, and still only requires one switch from the input!!

Here is a simple timing of the slaves vs. master mag amp coil in CCW rotation, just to show this principle of variable inductance control from rotation.



Now everyone needs to see the scalar south (fake south) that is pointing out in between the neo-tipped weak north’s. This is where the triggering of the hall switch needs to be. Since the neo is creating an asymmetrical large south compared to the north, the scalar south is going be very pronounced. Also the rotation of the neo causes the south field to cover a much larger area between the 22.5 degree sections. I or someone soon will talk about this later. This gets into geometry of the axle in generation mode to prevent lenz law!! Look at the sweet 16 diagram from John Depew that John posted, you should see the coils in the center now!! Also notice that the pie shaped barium ferrite magnets are pointing directly at these monopoles!! Ring the bell twice!! Look at the line at the 16 pole sun. We all need to see how to prevent lenz's law with the 10 coil axle.

I trust that this is mostly on the correct path John. This is by far the most important device to understand how to manipulate and make a man made flux field from Ed’s work as it is correct.

Hope this helps.
Jeremy Burnum

[everyidea]

ED was kind he left two things at the castle The wheel and what else?
John B

He left his PMH's, coiled jars/bottles, crystal radio parts, electric motor bolted to a wood board, chains, coils, pulleys and tack. But, I think people would be most interested in his actual large PMH, seen below. Both the wheel and the large PMH would be the show stoppers.

He also left us his photo's that he took himself. The photo of him turning the wheel shows many parts that are missing or have changed.

I believe Ed's flywheel is used to induce a current into a PMH, creating DC current and the two together make a generator. It can also be used in reverse to make a motor. So, combined they are a generator/motor.

rw

[citfta]

He also left us the moon pond with the Star of David in the center and the 16 waves around the edge.

Carroll

[Bit's-n-Bytes]

Now were getting somewhere

I just wanted to point out to all the work that Jeremy is doing. It might not be clear to many that here he is showing what happens when you “ring twice”, you get a HUGE answer. When the magnets approach the outer two coils...the first one makes a pulse to the center coil then the other makes a pulse to the center coil causing a magnetic double ring! What does that do? In my opinion it removes the iron from the coil lowering its impedance making a lower henry coil, but just for a moment. In that moment the coil is fired; and little resistance is found by the inrush of electrical energy. But then a beautiful things happens, the coil collapses without the altered impedance state...now that it has huge impedance. The coil releases way more energy than it should compared to the energy input it received from the electrical hit it took. When you play with the impedance of the coil you are able to get an energy gain if done correct. We all know who else has taken advantage of that effect a few months ago on a little Island...There are also several other places you can find people taking advantage of this effect, but the way that our beloved pioneer here has done it, is outstanding.

John, I would like to hear your critique of Jeremy's post and show us how we can polish it even better or get a better understanding of what is going on here. Is he correct? We are learning so much from your work I can't thank you enough for the time you are taking to teach us. I know it takes a lot of energy on your part to just read all that is going on...not to mention all the time you take on typing back to us. Thank you!

The greatest honor a teacher has is when his students can teach the teacher and carry the torch to an even higher place, my physics teacher once told me. I just hope we honor you that way!

Ding; Ding;


Karl

PS: Class please stop the bickering it is distracting. Ever heard of PM's...work it out on your own not in the forum.

Great work Jeremy! Karl thanks for posting this.

Jeff

[redrichie]

I have to admit with all that is taking place here I have not had a chance to read up on mag amps. But just the name got me to thinking. just my idea.
As the first magnet induces the field in the first coil (right most coil) and it passes into the next coil. (parallel) this coil (far left) is already charged to the same level as the first. Then the second coil gets induced and multiplied as it gets the added field as the second magnet passes over. Amplified with no more input. Then the 2 coils' (ring twice) energy pushes into the third coil and is again multiplied with the final magnet pass. BUT with the added shaped flux field giving extra push added from the scalar south. giving a very sharp and high spike that is then let rip through the cap pulser at the EXACT right time, as Matthew Jones has ingeniously posted.
That shield lights the indicator LED almost the entire way through the vector of the passing magnet. That is really something.

[redrichie]

Ive been wondering about that cooker.

My question to this group,
What does ED's machine look like and what parts go in it? He told you about magnetic streams and how they work, you would never believe what it is. I know that some pieces are missing from his workshop never found but hidden somewhere. maybe in one of those big blocks of coral. What does it look like? I'm going to make one and will show it to Aaron.
John B

[Aaron]

magnetic amplification

Karl & Jeremy - I'm on the edge of my chair with everything going on and
am glad there
are others that share the enthusiasm about how profound some of the
concepts are that have been shared!

I was also admiring erfinder's post about doing those tests with
the trifilar because it was the first time I saw that someone else was
doing something similar but for other purposes - I had no idea!

I hope I'm not off topic here but the mag amp concept is interesting. I had
been playing
with that concept on my trifilars with many experiments. For a long time
I had wound 2 windings in series just like in the Telsa pancake method top
of one to the bottom of another - quite a few experiments on the SG with
that. I think there is still a lot to learn about the SG and different things
that can be done to it.

Anyway, with the third winding (none of the wires are twisted and
on a few of my trifilars, the 3rd winding is in the opposite direction).
Anyway, I had done everything from shorting the third winding
(thinking I was creating a stiffer wall for the magnetic field to
collapse against to get a higher pressure spike) to putting a battery on the
3rd winding while doing hv
discharges into the coil (was trying that as a variation to mix HV and low
current with LV and high current) - but on different windings within
one coil. Some of these tests I was trying to experiment with something I
think was related to Baldinelli. That was on my "Gray" motor experiments -
different from the plasma circuits.

Just trying to learn more about the magnetic amplification as I heard
the term before but never looked into it until John brought it up here
and am happy to know there is something to these concepts even
though my intentions for doing these types of experiments were for other
purposes.

Anyway, just contemplating the below post (I shortened it a bit) and
thinking on the others that John already posted. The coils discharging
at different times amazes me more and more each time I think about it.

And in the switch, there are two different dipoles - a battery and a cap.
They are connected with a common positive and the switch looks for a
difference on the negatives.

A common positive connection between two dipoles and having a changing
difference between the negative potentials of each dipole in and of itself
is a location all on its own to tap "cold magnetic current" with no
resistance. I wonder if the cap discharge is pulling in some of this
massless charge from the negative potential difference between those
points as it is sent to the battery.

Think about how these coils are discharging,

Jerdee, great theory, however what is the downfall of the switch? and how
is it wasting power?

I know Ron Cole's notes were never published here on inductors but what would happen if the inductors were not all equal but were in parallel as Ron's notes indicated the current would not increase, only by a fraction that drove GE nuts and what about the two extra windings if they were held at a bias voltage inside. Would you not get the coil discharging at different times.

Three coils. what do they make up geometrical wise?

The capacitor is used in the positive domain and where is the spike really going but by the capacitor in the negative domain is it not going where Mathew said.

Just being sopped up a little at a time by the capacitor since the capacitor does not know what to do with it. Is it not in the circuit to keep the bi-polar switch from cross conduction on the devices, you have a full complementary amplifier in that circuit. I said the diodes must be right on the switch rails. right at the coil

[redrichie]

@ john.
Your axial portion is missing from his. There is a pipe that extends into the ground directly to the left of the flywheel. it has the ability to attach something there.
A collector/generator for this PHI potential you told us about in a post to Jetjis?

My question to this group,
What does ED's machine look like and what parts go in it? He told you about magnetic streams and how they work, you would never believe what it is. I know that some pieces are missing from his workshop never found but hidden somewhere. maybe in one of those big blocks of coral. What does it look like? I'm going to make one and will show it to Aaron.
John B

[John_Bedini]

Big Bedini Machine

Look I'm going to get to all the answers, but to me it is important that you understand what is going on with that axel motor, I have said it three different ways to get you all to understand. I do think and appreciate Jeremy's work it is real good and detailed. we learn by doing, I will not hand out the schematic drawing for the simple reason I stated in one of my posts, I wont debate that.

I want you to build this on your own, and don't talk to me about money I have spent everything I ever made to understand this energy and starved at times doing it. Wrong thing to say to me. If your thinking about money find a different hobby

I asked a simple question what is ED's machine and can you put it together or not. This is important because then you will understand how my big machine was ideling for no current.


The Conference
I stopped no one from touching or asking any questions about my machine at the conference, I let you walk around it I ran the machine you were allowed to look inside of the star wheel and everything else. I'm not here to bust your chops in any way, but I'm not going to just hand it over as you will not learn anything .

I have tried for years posting diagrams it did no good, people just took it and changed it and put a new name on it and then said it did not work after they goofed it up.

I have given my test. If you build your own machine you will feel better about it. Nobody ever said it was going to be easy and not cost anything to do it. That is the sacrifices we all take if were into this science.

John B

[redrichie]

at the entrance to coral castle the star of david. ADM.10 cents drop below. Not cents PHI!!! the golden ratio. John you say Delta PHI. Phi is also the number 21. where do we see this at the castle? on the door with a 16 point sun in the center, and at the bottom right the earth written and 21 over the top.
http://www.code144.com/img/cc-maintour/cc29.jpg
http://www.code144.com/img/cc-maintour/scc08.jpg