Bedini Ferris Wheel Regauging Motor

[Matthew Jones]

Not to go to far our but wasn't that Rodin fellow making one sided monopoles out of iron with his coils?
I'll try to dig that film up, I'm sure I saw it. I don't know if its valid to this though.

Matt

Well I don't know the Rodin stuff is endless, Hopefully some one will know where its at.

[cornfused]

Thanks Jason!

Are any of those the "pole splitter"? That is what is most intriguing
about what you mentioned before?

John just posted: "One other clue here. ED said that the magnetic streams could be split and if guided in the proper channels become perpetual in flow so we do not need anything spinning, do we. More later as I think of it."

If there is one thing to search for in that book at the moment, it would
be the "pole splitter" to see if it describes any of Ed's methods for splitting
the magnetic streams.

Away from my computer, but believe pages 96 through 98 discuss pole change. All other instruments from here on use it I believe.

[jerdee]

Not to go to far our but wasn't that Rodin fellow making one sided monopoles out of iron with his coils?
I'll try to dig that film up, I'm sure I saw it. I don't know if its valid to this though.

Matt

Well I don't know the Rodin stuff is endless, Hopefully some one will know where its at.

YouTube - Marko Rodin Permanent Monopole Magent (biased Poles)

Very Interesting!

Thanks for the heads up Matthew.

Jeremy

[Turion]

I have read the Davis material several times, and I believe he talks about a "Pole Changer" not a pole splitter. Quite a significant difference. Please feel free to correct me if I'm wrong. I would LOVE to be wrong!

[John_Bedini]

Bedini GT3

Turion,
Yes we do find quite a difference since he is talking about a Commutator with silver contacts.

The Rodin coils is doing it but not the same thing. you notice he does not check it with a magnet with like poles. That is why everybody has missed it..

So if I had an Iron ring and had two coils and I energized it what would I have. Think of the TPU is it not the same device and is it not started by a magnet, Magnetic Amplifier hidden from view. That is why nobody can make it, Sweet device also Magnetic Amplifier. Very easy to make the Monopole Motor that way self bias. Remember what I said it is not important to have real fast speeds. Woopy has showed this with the leds watch again how he looses the power to the leds. I could have made the motor go much faster during the conference. But then I would have lost the frequency of the energy. Chuck here at work has found out the same thing with Ricks little 3 pole kit so we are going to show you how to make it like the MonoPole 3 GT

Jerdee very good work on all that Lucky to have you here...... You all must think out of the BOX
John B

[Turion]

Here is one quote we might find useful from the Davis book on magnetism...

"Instead of a solid bar within the helix, there is an iron tube filled with wires
of the same metal ; the tube is sawed open on one side
throughout its whole length. By this arrangement the
magnetism is acquired and lost with greater rapidity
than by a solid bar."

And something I have been thinking quite a bit about since we began this discussion...

"It has been shown that when a galvanic current flows through
a helix, such as De la Rive's ring, its faces acquire polarity, and if free to move,
arrange themselves north and south."

SO as a current passes into a coil, it "arranges" the coil to have a North and South, IF WE LET IT. How can we FORCE it to have a different arrangement, which will rearrange itself when that force goes away? We know what the benefits would be of a coil that changed polarity rapidly, so what are the methods by which we might accomplish this with little or no use of power. In the Davis book it was done with an open flame. heating the wires.

[cody]

Jerdee,
Thanks for posting that schematic, i was looking for that exact setup, thank you. I was not at the conference so im having a hard time following what you saw on how john was switching. But i think i have a good idea on how its done. Below is a picture of what ive been doing. The point the switching should start (i believe) is just before the magnet reaches midpoint. Using a repulsive pulse going right up to midpoint or slightly after. Right at that point the next upcoming magnet should switch into the cores domain (if that makes sense) just like the radus demo. At that point the pulse ends and the magnets take over and suck themselves into the core, rotating the wheel. Then it starts all over again on the next midpoint but in the opposite polarity. Pulse width should be set as small as possible, just enough to switch the field(radus effect). By switching this way, your wheel will rotate slowly, because your not providing energy to turn the wheel, the magnets are doing the work and they work at thier own pace. This is how i see it currently but i will have a much better idea of just how well it works when i get the parts for the Bedini/Cole switch in the schematic you posted.

In between pulses, we should be able to extract a certain percent of energy from the magnets passing the cores as well either directly with the bridge rectifier or with a shorting magneto effect.



This is what the scope shot across the coils looks like with pulse locations. My setup does not generate a perfect sign wave, so i have drawn it as it is. You can see im pulsing on both polarities.

[Matthew Jones]

The Rodin coils is doing it but not the same thing. you notice he does not check it with a magnet with like poles. That is why everybody has missed it..
So if I had an Iron ring and had two coils and I energized it what would I have.
John B

Wouldn't you have a multi poled magnet. Say 2 north coils facing the iron ring would induce Souths at each end and a North field in the center probably directed 90 deg out or in to center. With the flux traveling at 90 deg's the tester may not be able to detect it.
But with a solid more than than likely the flux path would stay internal to the metal used.

Now if what you are saying is wrap the iron with 2 coils, the same would be true. The south flux would travel to the north via the iron and and the north flux would travel to the south via the air. It would appear to tester to be 2 north ends.

But if you run a magnet into the center of the ring it still would not travel all the way through. The inside of the norths would such the north face in and it would stop in the middle. So it would be apparent that it was composed of 2 separate fields.

I would have to say that if you can split an electrical dipole and let it run, like we do everyday it would be possible to split a magnetic one. But it seems to me that more than likely one pole is hidden by the other. Your metal is charged from the inside out. How is the question though?

I spent some time thinking about it from previous experiments. But I have not had any success charging any metal in fashion that non linear.

Matt

[Turion]

Interesting Matt, and I would agree.

Now I'm way curious to see how a TPU (I meant PMH) affects an iron ring, especially if the area between the "contact points" of the TPU ( I meant PMH) is wrapped with wire. What happens to the N/S on that coil when the TPU (I meant PMH) passes coils on a rotating iron ring? Or two coils wound opposite so either North or south poles of the coils are together? Lots of things to check out.

[Matthew Jones]

Whats a TPU? I guess I am in still in the dark.

Matt

[Turion]

I can't believe I typed TPU....that's from something else entirely. I MEANT PMH. LOL No wonder I confused you! Maybe this will explain it. I'm D..U..M..B!

[Aaron]

just as much strength

he does not check it with a magnet with like poles. That is why everybody has missed it..

That was amazing to watch!

Meter can't find it yet it affects a magnet with just as much strength
as the opposite pole on the other end of the magnet.

[John_K]

That was amazing to watch!

Meter can't find it yet it affects a magnet with just as much strength
as the opposite pole on the other end of the magnet.

Hi Aaron,

I don't suppose you could post a quick video?


John K.

[Rubberband]

@ Aaron
Hi I just finished resding the thread so far, feels good to be learning more about the secrets Mr. Bedini is opening minds and helping me know these things in this stage of my life. Having aq lot of fun with the riddles, wanted to ask, about your last one....are you talking about the effect that occurs when you place the north pole of a magnet to the center of a steel bar?

[Aaron]

no vids for upload

Hi Aaron,

I don't suppose you could post a quick video?


John K.

Hi John,

I don't have copies that I can upload.