New Renaissance Prizes offered to encourage Energy experimenters

[Kokomoj0]

Great to work with you guys, too!

how about we cut to the chase and skip all the small stuff, start where tesla left off and build us working tesla transmitter hooking them up to those windmills and say goodbye to pacific electric?


oh yeh and then for the record this funding is private and without interest by any parties, yourself or the gubafia?

[Slider2732]

By windmills, do you mean Wardenclyffe ?

Never really thought of the structure like that, more like a shuttlecock perhaps, for playing badminton.

However, we can "shake the very Earth" with the nature of forward thinking. Knowing that some aspects, ideas, concepts, can be forwarded to benefit all.
Which, Prof. Jones is graciously demonstrating leadership with.
There are many eminent and highly regarded people on this forum, yet such wording as described by an English phrase of 'come on lads, let's get this done' has appeared to be secondary to weeding out the naff fakes.
Many here are jaded with such antics, perhaps justifiably sinking out and into hobbyland by deserved choice. Others just want to learn about what others are doing. Yet others are a bit green, in a different sense of the word.
There's a Winston Churchill speech somewhere i'm sure - the essence, however, is that many of us share in the knowledge that this is the time for the new discoveries. A time when they will come forward.
Like a vision that is neither thought nor reality but pressing upon the eyes, we can see what is needed and can build what is needed.

A time...when the lads get this done

[MonsieurM]

Professor, you are so right, I just got bitten by the Devil's Details ....

[PhysicsProf]

Thanks Slider and MonsieurM... we're on the same page.

oh yeh and then for the record this funding is private and without interest by any parties, yourself or the gubafia?

The answer is YES -- this funding is private with no strings, as I've explained earlier in the thread. I have zero connections with the "gubafia", I assure you.

The goal is to get the new energy source out to PEOPLE worldwide. And I have a sense that we WILL SUCCEED in this in 2012. (Hence my email address, EMDevice12@yahoo.com .)

[Kokomoj0]

Thanks Slider and MonsieurM... we're on the same page.



The answer is YES -- this funding is private with no strings, as I've explained earlier in the thread. I have zero connections with the "gubafia", I assure you.

The goal is to get the new energy source out to PEOPLE worldwide. And I have a sense that we WILL SUCCEED in this in 2012. (Hence my email address, EMDevice12@yahoo.com .)

well the gubafia has an "interest" in anything that comes through the corporate system, school system et al, since it is considered a "benefit" by grant to the vassals. Yeh maybe a bit dramatic but its a very long story and I do not want to derail this thread.

I suggest the tesla tower simply because it does not "radiate" hence the FCC has no jurisdiction over any thing that does not "radiate" that I am aware of.

Next, thanks to EPD I now see that Professor Meyls work is not a replica of teslas work and even though it is not he has claimed that his students measured anywhere from 100-1000% at the receiver.

So why not build a few tesla towers and hook it to those windmills so I can have my electric car remotely powered?

[Kokomoj0]

By windmills, do you mean Wardenclyffe ?

Never really thought of the structure like that, more like a shuttlecock perhaps, for playing badminton.

However, we can "shake the very Earth" with the nature of forward thinking. Knowing that some aspects, ideas, concepts, can be forwarded to benefit all.

yes but we do not need more of the same "abstract forward thinking" that we have been saddled with, that got us into the mess we are in now, and stagnated true science for over 100 years now, we need backward thinking.

We don not need to invent NEW sources when we have OLD sources that are known to work that for political and or commercial reasons never made it off of the paper. Whats the point? Create new inventions that can be stolen by the deMOBcracy and locked up in some corpocracy owned patent so no one can manufacture it?

We have one on the books that anyone can grab that cannot be bought up by any mobsters and will not only produce but remotely transmit so why not use it?

why continue to throw good money after bad?

[minoly]

This one is on the house (in lieu of a hi-five smile)
small Battery charges Large Battery - YouTube
do you plan on sharing the circuits and ideas that come out of this?
so far, I do not see any...?????

Patrick

[PhysicsProf]

This one is on the house (in lieu of a hi-five smile)
small Battery charges Large Battery - YouTube
do you plan on sharing the circuits and ideas that come out of this?
so far, I do not see any...?????

Patrick

YES! -- I believe all those currently participating will share the circuits and ideas that come out of this -- that is the goal and the plan! In this way, we hope to em-power the people with a new energy source, and I'm hoping this will occur (as I previously said above) in 2012.

[shawnnweed]

PhysicsProf,

I placed my order today. Once again, Thank You.

,Shawn

[Web000x]

PhysicsProf,

Once again, I thank you for your generous contribution towards my efforts to get this parametric generator working. The grant that you sent arrived today. I'll keep you up to date on my progress.

Dave

[shawnnweed]

PhysicsProf,

I placed my order today. Once again, Thank You.

,Shawn

My LED's came in. They are just the emmitter. Trying to find a company to attach them to MCPCB's for me but none really want to do that because there just isn't enough money to be made in it. Oh Well, I figured out that the LED's I am using are the exact same dimension as previous models. I'll just order the MCPCB for those previous models and buy a reflow soldering oven online. I'll attach them myself. I have taught myself how to use all the equipment I have, why not one or two more. I knew this wasn't going to be an easy undertaking from the beggining. I have the box already lined with the monocrystaline solar cells. And I am making the high voltage panel as we speak. I bought a piece of plexiglass and cut it to size. I connected all the amorpous panels with this epoxy called 'liquid nails' and soldered about half of the solar cells in series. I am nearly pushing 200 hundred volts now. I accidentally got careless and burned out two cells so I stopped for the night. I'll finish tomorrow. Just wanted to keep you guys updated on progress.

,Shawn

[MonsieurM]

Thanks Shawn...and Good Luck

[Web000x]

PhysicsProf,

Thank you again for the 'boost' to help me complete my project. I needed it because the guy that was going to do some machining for me ended up screwing up my pulleys so I had to take them to a 'real' machinist and pay to have them doctored up.

I'll be spending the next couple of days working on my project and will keep you posted on my results.

I can't express my gratitude enough for the kindness that you have shown. That grant was exactly what I needed.



Dave

[shawnnweed]

So I tried. No company will connect them. I already have everything priced out. I'll order tomorrow and just go through the pain in the patella process of connecting everything myself...argggggg
Just in case anyone is interrested I ended up maxing out my panel at 235 volts. under 7,800 lumen. Obviously nowhere near the 368 volts I need. I tested the outputs at 100 watts, 50 watts and 25 watts. At 100 watts(7,800 lumen) the panel produced 235 volts. At 50 watts(3,900 lumen) the panel produced 208 volts. And at 25 watts(1,950 lumen) the panel produced 185 volts. So I have decided to build a second panel. Good thing is that I can get 185 volts from one panel at about 2,000 lumen. Which will give me 370 volts under 4,000 lumen using two panels. This brings my calculations down from being able to produce 14,600 lumen on the outside to 9,120 lumen which should yield an extra 378 millimaps and 4 volts(volts are easily variable). More than enough to run a cell phone but no quiet enough to run a computer. Once the parts are in, built and connected I should have a running model between January 10th-15th. I'll keep you guys updated as I go.

,Shawn

[MonsieurM]

Thanks Shawn...and sorry to hear you could not find someone to do the job...look at it this way:

If you want a job done well/right, do it yourself