Bizzy's Bedini Machine aka Watson Machine

[gorthox]

Food for the mind

Just some food for thought (and for conversation, this thread is dying )

Does anyone have thoughts or interest in modifying this system to be compatible with an electric vehicle?

Exactly how loud is this machine, and what parts of the system are creating the noise?

Is it possible to extend the shaft of the motor enough to add another switch and alternator? If so, would this make the device more compact/more efficient?

I am mainly asking these questions to further develop the design and improve the future of this device. All input is worthy, no idea is stupid.

gorthox

[Bizzy]

Just some food for thought (and for conversation, this thread is dying )

Does anyone have thoughts or interest in modifying this system to be compatible with an electric vehicle?

Exactly how loud is this machine, and what parts of the system are creating the noise?

Is it possible to extend the shaft of the motor enough to add another switch and alternator? If so, would this make the device more compact/more efficient?

I am mainly asking these questions to further develop the design and improve the future of this device. All input is worthy, no idea is stupid.

gorthox

Hi Gorthox
Yep i know it seems like this thread is stagnet, which it is. Once I get some personal issues sorted I will be able to devote more time to the machine and this thread.


I also wondered if it could be modifed for a vehilce. The orginal units are VERY heavy which is mostly because of the stands I am using to prevent them shacking apart But I always thought that with the proper mounts that yes they can be used in a vehicle.

They are louder than my wife will allow in the house Actually there is only one noisy part which is the transfer switch. I tried using solid state swicthing ie mosfets and transisters etc but they couldn't handle the extreme voltage that was needed to spike charge the transfer battery. That is why i went with a mechanical switch. Unfortunately that is the nature of the beast and trust me it is LOUDEar protect is needed whenever I go to inspect them. Since I was practically raised in a sawmill noise doesnt usually bother so that gives you some idea how loud they are.

As far as your other question many additional alternators can and were added to the shafts. Because of the bearing system i use I can extend the shaft as much as possible. Currently each unit has five alternators additional on it. One unit actually has seven additional alternators on it.
Bizzy

[Gedfire]

Watson Wilson very BIZZY

Hi Gorthox
Yep i know it seems like this thread is stagnet, which it is. Once I get some personal issues sorted I will be able to devote more time to the machine and this thread.


I also wondered if it could be modifed for a vehilce. The orginal units are VERY heavy which is mostly because of the stands I am using to prevent them shacking apart But I always thought that with the proper mounts that yes they can be used in a vehicle.

They are louder than my wife will allow in the house Actually there is only one noisy part which is the transfer switch. I tried using solid state swicthing ie mosfets and transisters etc but they couldn't handle the extreme voltage that was needed to spike charge the transfer battery. That is why i went with a mechanical switch. Unfortunately that is the nature of the beast and trust me it is LOUDEar protect is needed whenever I go to inspect them. Since I was practically raised in a sawmill noise doesnt usually bother so that gives you some idea how loud they are.

As far as your other question many additional alternators can and were added to the shafts. Because of the bearing system i use I can extend the shaft as much as possible. Currently each unit has five alternators additional on it. One unit actually has seven additional alternators on it.
Bizzy

Firstly, Bizzy I want to congratulate you on the time and effort you have expended in getting this device to work.

I see you mentioned the noise problem.Maybe you could deviate add what others have found to work for them to your machine.I speak of the Chas,Wilson and Jacob Bitsaze devices outlined in Patrick Kelly's pdf.The Water Wheel guy is worth looking albiet we minus the water and use an efficient motor instead.

I will be doing just that during the summer when I have more time.

By the way was Jim Watson killed or what? Is he and family on a beach somewhere on a Caribbean Island ? They said he disappeared.All these years without a word!? Come on, he must go to a park somewhere or some airport.He could'nt have "borrowed" the Great Master JB Work and run with it and was never seen again?

And Sir JB, are you sure you are still not shaken up by the thugs that visted you so many years ago? I ask because, I am yet to see the King Size Castle powering Watson Machine done with all the modern technology at our disposal.Come on its 2013! An gasoline is US$7:25 per litre so you can imagine electriciy bills US$300 per month....

Know why I haven't tried yet.I work and funds, well I have to be careful with that, but I will see what I can put together.

Ged

[tachyoncatcher]

By the way was Jim Watson killed or what? Is he and family on a beach somewhere on a Caribbean Island ? They said he disappeared.All these years without a word!? Come on, he must go to a park somewhere or some airport.He could'nt have "borrowed" the Great Master JB Work and run with it and was never seen again?

Hey Ged,
I read some where, Jim Watson was not killed or disappeared. He just sold out. He moved after the sale, not disappeared. Per the terms of his sale, he did not talk about the build or design. Nothing so mysterious.
Randy

[Bizzy]

Firstly, Bizzy I want to congratulate you on the time and effort you have expended in getting this device to work.

I see you mentioned the noise problem.Maybe you could deviate add what others have found to work for them to your machine.I speak of the Chas,Wilson and Jacob Bitsaze devices outlined in Patrick Kelly's pdf.The Water Wheel guy is worth looking albiet we minus the water and use an efficient motor instead.

I will be doing just that during the summer when I have more time.

By the way was Jim Watson killed or what? Is he and family on a beach somewhere on a Caribbean Island ? They said he disappeared.All these years without a word!? Come on, he must go to a park somewhere or some airport.He could'nt have "borrowed" the Great Master JB Work and run with it and was never seen again?

And Sir JB, are you sure you are still not shaken up by the thugs that visted you so many years ago? I ask because, I am yet to see the King Size Castle powering Watson Machine done with all the modern technology at our disposal.Come on its 2013! An gasoline is US$7:25 per litre so you can imagine electriciy bills US$300 per month....

Know why I haven't tried yet.I work and funds, well I have to be careful with that, but I will see what I can put together.

Ged

Hi Gedfire
Thanks to several suggestions and encouragement from volks here on the forum I was able to over come or atleast mask the noise problem to keep my wife happy
I have several units up and working now. For reasons beyond my control I had to relocate the machines which set back any further research as well as posting an up dated video.
I have two updated videos already showing some of the improvements and more detail on its working. I am also starting a how to video...I will keep you all posted.
Thanks
Bizzy

[Gedfire]

Thanks

Hey Ged,
I read some where, Jim Watson was not killed or disappeared. He just sold out. He moved after the sale, not disappeared. Per the terms of his sale, he did not talk about the build or design. Nothing so mysterious.
Randy

Thanks Randy! So its up to us to remake it then.

@Bizzy
Excellent.That is what I love about this forum. I am going to check out your videos.
Thank youu for your time.
By the way, any schematics yet?
Ged

[Turion]

We're waiting patiently, Bizzy.

Even if you aren't yet ready to share schematics, do you have a parts list so some of us could start the process of gathering the necessary parts? It takes time to save up money and to get things that you have to order, so any advanced info would be greatly appreciated.

Dave

[Bizzy]

We're waiting patiently, Bizzy.

Even if you aren't yet ready to share schematics, do you have a parts list so some of us could start the process of gathering the necessary parts? It takes time to save up money and to get things that you have to order, so any advanced info would be greatly appreciated.

Dave

Hi Dave
I apologize for not being on line latley....My wife and I have just finished moving and I am almost finished train kill by for my new job.....however after one more week I will be able to devote more time to sharing details of my work....Thanks for your patience
BIZZY

[Turion]

Turion

Not a problem man. Just worried a little since we haven't heard from you. Can't wait to see what you've got.

Dave

[Bizzy]

youtube

Good morning everyone
Because of circumstances beyond my control had to take down my videos. However they are currently up. Enjoy and feel free to comment on them
My new job is going great(and is much better than my last job which I hated)
Unfortunately I am away slot of the time but will continue to post when I can
Bizzy

[tachyoncatcher]

Link?

Hey Bizzy,
Good to hear things are going well. Do you have a link to your youtube channel? I can't find ya.
Thanks,
Randy

[Bizzy]

Video Links

Hi Randy,

Here are the links for the video of my machine. I am currently away from my house for work so I can't down load the new video but the old ones give you a good idea of how it works
I do have a new video showing more detail and am working on a how to video on how to build the switch, which is the key element to the machine. I know John uses a solid state circuit but I am a humble hillbillie so I use a mechanical switch. Just remember if you start this project IT IS LOUD!!!!!

Bedini Machine aka Watson Machine - YouTube

Transfer Switch part 2 - YouTube

Transfer Switch.AVI - YouTube

Let me know if you have any questions. Once I get back home I will post the new video and the parts list.


Also this is an official disclaimer to those from Lord Corporation who are watching this site. Please note that it is now six months since my termination and you have no authority over my ideas or personal intellectual property.
As a result of my termination six months ago I can now freely give away my ideas to the benefit of others.

Let me know if you have any questions
Thanks
Bizzy

[OrionLightShip]

Cool deal

That's a cool deal you got there! Sounds like a diesel truck but it works!

[Gedfire]

Thanks Bizzy

Hi Randy,

Here are the links for the video of my machine. I am currently away from my house for work so I can't down load the new video but the old ones give you a good idea of how it works
I do have a new video showing more detail and am working on a how to video on how to build the switch, which is the key element to the machine. I know John uses a solid state circuit but I am a humble hillbillie so I use a mechanical switch. Just remember if you start this project IT IS LOUD!!!!!

Bedini Machine aka Watson Machine - YouTube

Transfer Switch part 2 - YouTube

Transfer Switch.AVI - YouTube

Let me know if you have any questions. Once I get back home I will post the new video and the parts list.


Also this is an official disclaimer to those from Lord Corporation who are watching this site. Please note that it is now six months since my termination and you have no authority over my ideas or personal intellectual property.
As a result of my termination six months ago I can now freely give away my ideas to the benefit of others.

Let me know if you have any questions
Thanks
Bizzy

Thank you very much for posting this.I knew intuitively that someone was after you.They can forget it.The videos are out for all and Sundry.Not like those old days.Its difficult to suppress these things anymore.VERY.Too much money, too much killings, too many cell phones with cameras, too many people from too many countries...... too many smart ones... Just leave them be people.Thanks again Bizzy, please let us know anything, anything.

Ged

[alman]

good work

Been following you since last year, not the creepy kind keep it up Bizzy. Couldn't view transfer switch II though. not sure why. Al