Water Sparkplug

[Guest]

Working Circuits

Here are some of s1r9a9m9's diagrams which can be found here...
It also relates his findings to some of Tesla's

http://waterfuel.t35.com/water_explosion.html

[Peter Lindemann]

New Ideas

Hi Peter, Aaron and everyone.

It is nice to see all the activity and enthusiasm here compare to my original topic I started at Overunity, which seems to be dying now. I think people can get too easily distracted by dangling carrots and soon forget they were holding one. My life experience has tough me that moving from one thing to the next will not give you any more! in fact I found those who stuck to one thing actually got more.

I do support the idea of different topics which should help keep focus to those who wish to get a deeper understanding of a specific circuit or an effect before moving on to something else.

Now about the Water Power circuit. I can see that many are wondering how I got the circuit to work with a 2uf capacitor. I was able to do this but the circuit was different then from now. Earlier the + of the bridge would stay connected to the LV side with 10 x 1N5404 in series (see below attachment) and the cap was connected only to the + of the coil and not to the LV side. The circuit work this way and I also found that I was able to get it to go in a kind of hyper mode when I used a variac and isolation transformer and went over 140 volts to 160 volts. This video: YouTube - Ganga Shakti - Water Power Test 2 is demonstrating this. Now be very careful if you get it to this! as the light is full of UV and you should not look at it without eye protection. You will be able to tell once it gets there as the spark sound different and it's like looking at the Sun. Also the interesting part is you would think it would get hot but it doesn't, maybe about at body temperature.

@Peter L, I would like if you can try this setup since you have the equipment needed and I would really like know what you think of this Hyper Spark effect.

Luc

P.S. just to let you all know, my name is pronounced just like Luke but I write it in French since that is my first language.

Luc,

Sorry about mispronouncing your name on my video. I'll probably build up a variation of Aaron's new set-up today. There were a number of things I was about to try, anyway. Also, if Aaron comes to my shop today, we can film it and put it up on YouTube.

Thank you for publishing these ideas. You have made a huge contribution to the understanding of the production and management of Radiant Energy.

Peter

[Peter Lindemann]

Ancient Toaist Parable

Awesome.....Ive been up all night working on this...God! I think Im going to "Awake" Myself to Death! Even when I sleep I dream about this circuit! Am I going crazy or are there others out there!

Dear Red,

One day, the Chinese Sage Chuang Tsu was walking to the next town to buy some vegetables for dinner. He found a shady tree near a meadow, and decided to sit down, and take a nap. He fell asleep and began to dream. He dreamed he was a butterfly, flying over a beautiful field of flowers. As he flitted along, he flew over to a tree where he saw a man sleeping. As he got closer, he saw that the man under the tree was the Chinese Sage Chuang Tsu. He flew on, and found a beautiful flower to land on. He landed on the flower, opened his wings in the warm sunlight, and fell asleep. The butterfly dreamed he was a Chinese Sage walking along a path to the next town. He went shopping in town, and on his way back home, he came upon a beautiful meadow. There he saw a butterfly sitting on a flower and a man sleeping under a tree. He went home and made a simple dinner of rice and vegetables and contemplated his quiet, ordinary day. Later, he went to bed and fell asleep. That night, he dreamed that he woke up the next morning and never knew if he was the Chinese Sage dreaming of being the butterfly, or the butterfly, dreaming of being Chuang Tsu.

Peter

[selamatg]

follow that inner voice, it will guide you.

Luc

That's right....the inner voice will never lie, full of love and peace.
Sorry my post not related the threads....I'm good reader and learn from you all.

What you all done is wonderful

Selamatg

[rick123]

I don't want to cloud up the thread, but last night I dreamed about the circuit, and motors. I must of had 12 dreams and kept waking up in between them. It was so instense that I told my wife and one other person about it this morning. Then I came on here and read the thread.

[UncleFester]

For a fog of water in the 5 micron range there is no need for a high pressure injection system. You simply use a pond fogger and vary the fog in order to vary the RPM, just like a diesel.

Image attached of 5 micron mist from pond fogger in chamber.

Tad

[Redmeanie]

For a fog of water in the 5 micron range there is no need for a high pressure injection system. You simply use a pond fogger and vary the fog in order to vary the RPM, just like a diesel.

Image attached of 5 micron mist from pond fogger in chamber.

Tad

Yes I have a whole box full of those. But we are going to need to calibrate precisely Pulse Width to control effectively it effectively. The Fogger may work on a Carburated single piston, but in a Multi Cylinder Engine the output will not be sufficient or controllable with varying loads.

[brusers]

replication

Hello, looks like I'm a day late and a dollar short.
But here is the video of my replication.

YouTube - Water spark plug

At first I had not noticed anyone really replicating this effect. And I say this in the video. Now I go online and there are dozens of people experimenting with this. Great to see.
I'm sure I'll be messing around with application as well, but first I need to get a better understanding of what is happening.
So anyway, keep up the good work gents..

Marcel

[Aaron]

booster cap

(capacitor and coil secondary make a closed loop) but it is stopped by large self-induction of coil .

There are a few diode placements that I will try but was sidetracked by something else.

Anyway, the secondary booster cap on the right side of my diagram...you are correct...it is a closed loop. If the cap is charged and everything is off, the cap will slowly drain because it is short circuited.

When the system is on, the leakage is slow enough that the voltage on the cap is high enough for each pulse in order to be helpful.

[Aaron]

dreaming of circuits

Awesome.....Ive been up all night working on this...God! I think Im going to "Awake" Myself to Death! Even when I sleep I dream about this circuit! Am I going crazy or are there others out there!

3-4 days a week when I wake up in the morning, I'm waking up out of dreams with different circuits running through my head. The Energy Mastermind module is making a subtle difference for everyone working on these projects and the more tuned-in someone is to the collective, the more each person will draw from it. If personally using it, it is exponentially stronger.

[Aaron]

another great vid

Great vid! I don't think any vid puts this to shame. This is part of the foundation of developing new methods...more people replicating. It is repeatable and predictable with a large margin of variations that can be done with coils, caps sizes, etc... and it still works. That makes it very practical to keep going with this project with high speed obsession.

Your cap charged with radiant works different than a cap charged with an inverter/variac or other hot source. On this scale we're working on, the difference might not be noticeable but the properties of radiantly charged caps are different.

Hello, looks like I'm a day late and a dollar short.
But here is the video of my replication.

YouTube - Water spark plug

At first I had not noticed anyone really replicating this effect. And I say this in the video. Now I go online and there are dozens of people experimenting with this. Great to see.
I'm sure I'll be messing around with application as well, but first I need to get a better understanding of what is happening.
So anyway, keep up the good work gents..

Marcel

[jstadwater]

To Aaron and/or Peter.......

I am not skilled in electronics, therefore, a couple questions . I want to duplicate you guys' setup to start testing myself. Could you explain to me the relay used and exactly which posts to hook up to properly execute this circuit. Is it a standard 5 post relay? I have a box full of 40 amp ones if I can use them. I took apart a freebie microwave today and only found a cap that says 1.06 uf 1750 volts, will that work? It had a blocking diode hooked to one side to case ground, but I don't know the rating (is there a way to test it?). Maybe too old of microwave. The cap doesn't look anything like what yall are using, it's much bigger and ancient looking. I have a bridge rectifier to use, 60 amp, and a 1000 watt 12V d/c to 120V a/c with 2000 watt peak surge. Can I use that since I don't have a variac? I remember Peter said in the video he used a 12,000 volt diode at the coil, Does Radio Shack sell those you think? Sorry for all the questions, but I REALLY want to build this, I just don't want it to blow up in my face. Thanks for any help you guys can offer.

[boguslaw]

I would not recommend to play with 1.06 uf 1750 volts cap without experience with lower voltage caps and circuits. It is able to kill you in less the a second.No second chance.

[Peter Lindemann]

Excellent Work

Hello, looks like I'm a day late and a dollar short.
But here is the video of my replication.

YouTube - Water spark plug

At first I had not noticed anyone really replicating this effect. And I say this in the video. Now I go online and there are dozens of people experimenting with this. Great to see.
I'm sure I'll be messing around with application as well, but first I need to get a better understanding of what is happening.
So anyway, keep up the good work gents..

Marcel

Marcel,

Thomas Edison used to say that Genius was 1% inspiration and 99% perspiration! Your video shows initiative, and the willingness to ACT when you saw no one else doing so. You proved to yourself that the phenomena is real and you generously shared your findings with the rest of us. No one could ask more of you!

Well done!!!

Peter

[rickoff]

Re: videos

Aaron, Peter, and Brusers,

Excellent videos, I enjoyed them very much.


Rick