Water Sparkplug

[gmeast]

correct us idots then

I'm sorry to burst everybody's little bubble here .

But this thread is 100% incorrect and an insult to our intelligence .

This thread needs to be closed , it is hindering true progression ...

Hi Donkey,

If you have the intelligence to draw that conclusion then why don't you do us all a favor and set us straight. We would all appreciate it and I'm sure we would all revere you and worship you till the end of time.

[dankie]

I will gladly set you straight ... I do have the intelligence for that .

Plz dont call me Donkey ...

http://www.energeticforum.com/renewa...oil-6-1-a.html

430 FR inductance wire


I suggets you watch the colorado video , part 6 and 10 are very interresting ...

YouTube - stanley meyers colorado video

[gmeast]

this thread

I will gladly set you straight ... I do have the intelligence for that .

Plz dont call me Donkey ...

http://www.energeticforum.com/renewa...oil-6-1-a.html

430 FR inductance wire


I suggets you watch the colorado video , part 6 and 10 are very interresting ...

YouTube - stanley meyers colorado video

Contribute or leave Donkey. Do you even know what this thread is about Donkey ? Donkey ... I'm turning you in Donkey. Start your own thread Donkey.

But first Donkey, please set us straight. I can't wait ! This is not a Stan Meyers thread Donkey. There are plenty of those Donkey. Go there Donkey.

Have a nice day Donkey

[dankie]

Contribute or leave Donkey. Do you even know what this thread is about Donkey ? Donkey ... I'm turning you in Donkey. Start your own thread Donkey.

But first Donkey, please set us straight. I can't wait ! This is not a Stan Meyers thread Donkey. There are plenty of those Donkey. Go there Donkey.

Have a nice day Donkey

WOW i am impressed by your intelligence . Really , you will go far ...

The posts i made are the result of very tedious and incredibly deep study into Meyers and they are about "exploding water" and running an engine on 100% water , just like this thread .

Why dont you go join FEMA if you want to turn people in , you seem to have the "brute force" personnality ...

[gmeast]

so long

I wish everyone in this thread very happy experimenting.

UP YOUR ASS DONKEY!!!!

[dankie]

I wish everyone in this thread very happy experimenting.

UP YOUR ASS DONKEY!!!!

No need to be impolite...

I know that sometimes new knowledge comes in that contradicts your own reality , it is normal human behavior .

It's OK , i'm not mad at you ...

[dankie]

I wish everyone in this thread very happy experimenting.

UP YOUR ASS DONKEY!!!!

If you actually read my posts before you insulted me , you would know that my claims hold some very serious weight.

[Aaron]

***everyone Please Read This Post***

I'm sorry to burst everybody's little bubble here .

But this thread is 100% incorrect and an insult to our intelligence .

This thread needs to be closed , it is hindering true progression ...

I have seen more REAL progress in the last several months on this water spark plug thread with REAL replications and REAL results than in that last 9 years of Stan Meyer replications combined.

This thread is VERY correct in my opinion - in saying that there are things we are STILL learning about this technology and nobody can say they have it all figured out because if they did, they would be driving a car on 100% water.

This thread is one of the most intelligent threads on the entire internet in the entire "Free Energy" field...PROVEN by results and not politics. 43% increase in gas mileage with an ignition system and water mist - I haven't seen results like that from anyone else with any kind of ignition system. Krupa may have had more, but there isn't enough documentation in the public domain to even verify those claims. He claimed 70% increase with the Firestorm and 43% is MORE than half of that increase, which is astoundingly incredible.

Documentation like this beats conversation any day of the week. It is real, factual, proven and it works. The open sharing of results, schematics, measurements, etc... of these tests are what allow all of us to move forward.

Dankie, I have enjoyed many of your posts but if you disagree with something in this thread...the best way to express it is to start your own thread and not disrupt this one...or simply post your opinion and not point out why someone else is wrong. If anyone disagrees with this, they are disagreeing with what has PROVEN to work as far as seeing real results in this thread. You made an assumption everyone here is trying to replicate Stan Meyer's injector igniter system. It is NOT what this thread was ever intended to be. It was to duplicate Luc's method first, which was an attempt to figure out S1R's water car circuit to my understanding.
Again, feel free to start your own threads and post what you want but disrupting any thread on Energetic Forum is NOT ACCEPTABLE IN ANY WAY SHAPE OR FORM. Please do not post in this thread anymore.

See: Announcement: Forum Guidelines-Please Read Before Posting


For everyone, please keep this thread productive. I wasn't aware of any tension until I just read these posts.

Keep Stan Meyer stuff in Stan Meyer threads. If there are references to him, that is fine but this is specific to the water spark plug thread as it relates to Luc's original circuit and outcroppings of that.

Anytime anyone sees any post that is inappropriate for any thread, just click this icon: at the top right of any post and you might have to type in a message or something. Anyway, it will be instantly emailed to every moderator on the spot.

[Ursine]

I just finished the gear reduction for my 4 stroke weed whacker engine. This is similar to Jetijs genset mod. My laser won't cut metal so I made the gears from 3/16 inch acrylic. Sliding the microswitch in the slot allows for timing changes. I don't expect the gears to stand up to any abuse, but it's good for experimenting.
Unfortunately, I'm having a hard time finding a non-resistor plug to fit the engine. It's got a small diameter and tapered collar(the plug in the video is a typical non resistor lawnmower plug).

Ready for hho/watermist.

YouTube - Waterspark1

Dave

[boostedbb]

diodigero

Thanks gmeast.

I don't want to burn stuff up either, just want to make it affordable enough to accomplish on a tight budget. I can get microwaves for near free, but only find one or two big caps and a diode or two in there. I may succeed at making a ball type plug before I can get this circuit finished. So be it. Keep up the great work.





I know ... pricey... $6.29 ea. for me ... $100 in diodes - OUCH! I use 4 ea. in parallel to be super conservative. I have run continuously at 2 ea. in parallel and they still don't go past their rated temperature. I just don't like electronic things getting so hot they burn me when I touch them. You don't want to get too hot though because resistance increases with temperature forcing more current through the cooler one, then it heats up and you'd think this would be self-modulating/self-moderating but you might hit a thermal resonance and one will just get too hot and 'pop' with the remaining one failing in over current ... remote scenario, but possible.

I think 3 parallel is safe ... I was just in a soldering mood.

Greg[/QUOTE]

[Jetijs]

I just finished the gear reduction for my 4 stroke weed whacker engine. This is similar to Jetijs genset mod. My laser won't cut metal so I made the gears from 3/16 inch acrylic. Sliding the microswitch in the slot allows for timing changes. I don't expect the gears to stand up to any abuse, but it's good for experimenting.
Unfortunately, I'm having a hard time finding a non-resistor plug to fit the engine. It's got a small diameter and tapered collar(the plug in the video is a typical non resistor lawnmower plug).

Ready for hho/watermist.

YouTube - Waterspark1

Dave

Hi Dave
That's a nice gear system you got there If I may suggest something, are you sure that the microswitch is capable operating at 25-30Hz frequency? Because that is the frequency that it will have to operate to get your genset to run at 3000 RPM (50Hz) or 3600 RPM (60Hz).
3000 RPM is 50 revs per second, geared down it is 25 revolutions per second, but this is still too much for a mechanical switch in my opinion. Also, if it will be capable of operating at such frequency, I am not certain about how long it will last. So I would use a magnet and a reedswitch instead, or an optoswitch, but that is a bit more advanced.
Anyway, thank you for sharing. Let me know if you need any help on switching circuits

[Chris31]

I just finished the gear reduction for my 4 stroke weed whacker engine. This is similar to Jetijs genset mod. My laser won't cut metal so I made the gears from 3/16 inch acrylic. Sliding the microswitch in the slot allows for timing changes. I don't expect the gears to stand up to any abuse, but it's good for experimenting.
Unfortunately, I'm having a hard time finding a non-resistor plug to fit the engine. It's got a small diameter and tapered collar(the plug in the video is a typical non resistor lawnmower plug).

Ready for hho/watermist.

YouTube - Waterspark1

Dave

Some seller on ebay sell the non-resistor plug for mower. Whats the partnumber of the original plug? champion/NGK or equivalent should make the non resistor version.

Jet is correct about the switch, you are better off using reed+magnet.

I used hall effect on my setup. Alegro make a few type in SIL/SMD packaging.

I dont think opto is suited for this. Dirts, ambient light may effect the operation, unless its all sealed.

[Jetijs]

I dont think opto is suited for this. Dirts, ambient light may effect the operation, unless its all sealed.

So far I haven't had any problems with optoswitches at all. And my generator has run for more than 30 hours for testing. Of course it is a lot easier using reedswitches and magnets, but that is not so precise

[Ursine]

Jetijs,

Thanks I may take you up on the circuit help... my electronics is quite rusty.
I don't expect the switch to hold up, it's just what I had on hand for a proof of concept.

Dave

[ashtweth]

Hi Donkey,

If you have the intelligence to draw that conclusion then why don't you do us all a favor and set us straight. We would all appreciate it and I'm sure we would all revere you and worship you till the end of time.

, i got tears in my eyes, and i nearly choked on my drink. This forum is dangerous