Ionization & Water Fuel

[Aaron]

basic idea of water fuel system

I'm not saying this is 100% accurate, just general idea of
air + water into intake and possibly some exhaust recycling.

[pengrove]

Aaron, look at Dynodon64 video at about minute mark 5:40. I would say that the gas gun uses the same principle as the gas processor. I see three electromagnets and tons of Led's. Use your imagination on that one and see what you come up with.

YouTube - Dynodon64's Channel

[pengrove]

I would like to see someone make a flash back arrester with an electromagnet.

[Aaron]

gas processor

The gas processor should be the same in concept but I think that only
strips electrons. Tutanka's uses both polarities in some arrangement and
may not be exact to the diagram I posted below - what he posted in the
other thread.

[pengrove]

Tutanka is throwing curve balls. The electrons are ejected during the water splitting process. The UV light is causing a hydrogen bond shift.

The hydrogen must pass through the UV light to bond with the nitrogen.

And yes I am enlightened literally

He is using both polarities to create a back flash suppressor, much like Tesla's magnetic disruptor.

If Tutanka wants to tell me that I am wrong he can do so, but he can not lie, because he is righteous.

[tutanka]

D18 pdf and jo cell..

Casually I have read today D18 pdf and joe cell.. My attention has gone on these words on D18 pdf...

" Let me remind you that during the initial testing, the air intake needle valve is closed completely and it is not eased open untlil the engine is running satisfactory. In the engine acclimatisation period, the engine should be run on it's normal fuel and the cell just used as a booster"

And I have understand, from these words, that car using that cell run every thanks to NH3 not N(OH)2 or orgone..

In fact hydrogen produced trought electrolisys is absorbed from SS316L internal cylinder and ONLY after "acclimatisation period" air valve is open.. positive field and electromagnetic field start an reaction from air (nitrogen) and hydrogen on metal reacts creating NH3.. These cells are old's but inventor had good intuition and use SS316L similarry to metal hydride for absorb hydrogen.. No orgone .. no N(OH)2 only NH3+ FUEL. That's all

[tutanka]

I'm not saying this is 100% accurate, just general idea of
air + water into intake and possibly some exhaust recycling.

what is the sense of that configuration? and final chemical reaction?? Merlino I'm only Regards

[Slovenia]

D18 pdf and jo cell..

Casually I have read today D18 pdf and joe cell.. My attention has gone on these words on D18 pdf...

" Let me remind you that during the initial testing, the air intake needle valve is closed completely and it is not eased open untlil the engine is running satisfactory. In the engine acclimatisation period, the engine should be run on it's normal fuel and the cell just used as a booster"

And I have understand, from these words, that car using that cell run every thanks to NH3 not N(OH)2 or orgone..

In fact hydrogen produced trought electrolisys is absorbed from SS316L internal cylinder and ONLY after "acclimatisation period" air valve is open.. positive field and electromagnetic field start an reaction from air (nitrogen) and hydrogen on metal reacts creating NH3.. These cells are old's but inventor had good intuition and use SS316L similarry to metal hydride for absorb hydrogen.. No orgone .. no N(OH)2 only NH3+ FUEL. That's all

Tutanka,

A group of us worked with Oz Nitro Cell / D18 for about three or so years and were unable to get it to work. I've always been convinced that it was a working system but some fact must have been left out because we were never able to get it to work satisfactorily. My original contact in Australia worked for a small factory that sold them in Oz until they were told by the government to stop selling them. Also, my contact said he was always being harassed by government types each time he responded back to my posts. He was a great guy but I'm convinced he left some details out so as to insure his well being. I'd be happy to tell you anything you want to know about them. If you think you can figure out what details were left out so that we can get them to work, that would be great. Thanks. When we couldn't get the D18 to work we went on to the Joe Cell. I finally got my cell to run ice cold but was unable to get it to help run my motor. I did notice some very strange qualities about the Joe cell however. It seemed to have a mind of it's own and could make you feel very sick if the polarity of the plates was wrong. I learned a lot about them too. When I finally got one to run cold on the bench, it made a difference in the way I felt. It seemed to energize me and make me feel very well and happy. I seemed to have a lot of energy too. When I would walk by the cell I could feel some sort of energy coming from it to me. It was a very strange thing indeed.

Best Regards,
Slovenia

[Aaron]

process

what is the sense of that configuration? and final chemical reaction?? Merlino I'm only Regards

There are quite a few steps to the reaction I think and needs
enough time to take place.

Different people with results have different view of reaction but everyone
with results have one thing in common, ammonia is eventually created
as a part of the process.

[sucahyo]

Casually I have read today D18 pdf and joe cell.. My attention has gone on these words on D18 pdf...

Interesting .

The truth of the matter is that nobody really knows why this system works, it just does. This is a totally unconventional system . It shouldn't work but it does. The more vacuum pulled on the chamber, the more fuel gas output. The more vacuum pulled on the chamber, the more nitrogen is needed and it is drawing into the chamber through an air inlet valve on the end plate as needed. Something about the electrolytic action on the water and salt mix, magnetic action of the wire coil and vacuum serve to speed up the reaction process. These various actions are reacting on the water and salt mixture which is causing outside nitrogen from the atmosphere to want to enter the cell and react with the water and salt mixture forming nitrogen hydroxide, the fuel gas referred to here. The magnetic wire wrap helps strip gas bobbles from the anode and cathode of the chamber so that more gas bubbles can be produced. As I said, we don't know why this works, it just does. We did not invent this technology but we have brought it out of the closet again, so that it can be enjoyed and replicated if desired.

With only 12V cell we can achieve molecule cracking !

[Aaron]

nitrogen hydroxide

Interesting .

With only 12V cell we can achieve molecule cracking !

That sounds almost exact to some of the posts in those old websites
I referenced that talk about "nitrogen hydroxide."

They say they brought it out of the closet, from what? WWII German
technology, original understanding of Meyer's, etc...?

[sucahyo]

That sounds almost exact to some of the posts in those old websites I referenced that talk about "nitrogen hydroxide."

I guess I miss your link .

Taken from different page:
ORBIT: FUEL SYSTEM NOTES

They say they brought it out of the closet, from what? WWII German technology, original understanding of Meyer's, etc...?

It is not what Slovania explain?

[Aaron]

references

Murlin mentioned the WWII connection.

Yes, that website with the red car, that is the oldest nitrogen hydroxide
claim I've seen.

[tutanka]

Hello,
Today I have received new images reactions from Italian Lens about experiment with UV and high pressure and I post these for your references.. Regards

[Slovenia]

Oz Nitro Cell Link

I guess I miss your link .

Taken from different page:
ORBIT: FUEL SYSTEM NOTES


It is not what Slovania explain?

Hi Sucahyo,

I'm the guy who was responding to all the questions on the link at cyberspaceorbit.com. I had a different name at that time but have been in this alternate fuel research business for about six years now and the Oz Nitro cell is where I had my start.

You mentioned in your post that it was not as I explained, so I would like to know what you have to say about the system. I would love to hear from you about this. I spent a lot of time and money on this venture and none of my team members and/or I were ever able to get it to work properly.

Best Regards,
Slovenia