We are the Peace. Gift for the humanity. Stanley Meyer Water injector Solved!

[sebosfato]

Well,
Hello People from earth!
We want to provide a technology witch will change the way you live!
We want to provide free energy, food, and medical support.
We are the Future, we are the peace, Aways!

I discovered how to run a car on water using Stanley Allen Meyer water injector principle and i would like to leave here the info about it and to find people interested in support me with money to construct the device and any technical help that we may need for completing the replication of the injectors.

All his work is based on Magneto hydro dynamics (MHD) and Electro hydro dynamics (EHD).

He created a high pressure cheaply inside his water tank and made the water to move at high speed crossing an electric field generating this way a high amperage.

He divided the generation of electrical energy needed to split the water in two parts. 1° the creation of high voltage field aways rising at low amps and 2° the creation of high amperage due to the high speed of flow of water in relation to his electrodes. The high amperage is what allows the electric field generator or (vic) to actually develop the high voltage!

I would like to receive donations on this https://www.paypal.com/cgi-bin/websc...if%3aNonHosted link , you just need to create a free account and choose how much you want to donate than you can easily send the donation using your credit cards.
We need lots of money aways but for now if we could put at least 20 thousand euros together for start constructing demonstration devices would be great! Actually for start changing people life we are going to need lot more money!

Special thanks goes to Steve from www.ionizationx.com forum witch helped to keep the flame alive! And all of you that have donated and helped anyway until now!

THANKS A LOT

You may want to check this thread:
Login

[Cloxxki]

Your claim seems similar to the one Rosco announced?

Where do you think your understanding of such technology will differ from his team's apparently succesful efforts? With their announcement out there, this would be important for your contributors to understand, else they might as well fund Rosco, if he is even accepting donations at all.

Thanks,

J

[sebosfato]

Thanks cloxxki for reading!

I got problems releasing my own patented technology and as i'm not a millionaire and so not able to create a market of it anyways i decided to release the info related with SM patents here for free as his patents are not protected anymore, before is too late! I propose that tutanka and rosco to do the same! Before is too late for their technology!

Today We have an illusion that we live in democracy governed countries, we think generally that our presidents governs our countries, but instead who controls the countries are strategy teams from army, they have no election by popularity, no democracy thus... When you patent something who control it is the army! They will never let this technology out! Thats why i decided to illuminate you with a technology different than mine witch has already being robed!!!! If i release my tech i go to jail because is like betray my country so i cant do this!

Information have being developed along last centuries and they must go ahead yet for more hundreds of centuries for free! Only this can free the people from slavery, hungry and inaqualities in a near future!

Best Regards

[Jetijs]

Do you have any proof of this working?

[sebosfato]

Yes jetis

Here it goes!

When you have electric fields in a capacitor where the dielectrics is a liquid and this liquid moves in a certain direction in relation to the electric fields a very high current will be generated!

This is the principle of energy generation.

When a conductor cross a magnetic field a current is induced in this conductor.

What happens is that electric fields, magnetic fields and gravity are basically the same thing. One creates the other and recreates the other and so on!

If you create a voltage field you induce a current witch causes a magnetic field. If you move a the conductor in relation to the magnetic field created you will consequently amplify the original current raising thus the voltage. and so on.

[thedude]

Thats why i decided to illuminate you with a technology different than mine witch has already being robed!!!! If i release my tech i go to jail because is like betray my country so i cant do this!

I'm really confused on this one.

[Slovenia]

Thank You!!

Yes jetis

Here it goes!

When you have electric fields in a capacitor where the dielectrics is a liquid and this liquid moves in a certain direction in relation to the electric fields a very high current will be generated!

This is the principle of energy generation.

When a conductor cross a magnetic field a current is induced in this conductor.

What happens is that electric fields, magnetic fields and gravity are basically the same thing. One creates the other and recreates the other and so on!

If you create a voltage field you induce a current witch causes a magnetic field. If you move a the conductor in relation to the magnetic field created you will consequently amplify the original current raising thus the voltage. and so on.

Hi Sebosfato,

I don't grasp all you have shared yet, but I thank you very much for sharing with us all.

Best Regards,
Slovenia

[sebosfato]

Hi the dude

Is because we have another technology that was recently blocked by the army! so we can't touch that subject again, however i could understand how stan did and here i want to share with you all because his patents are not protected anymore! So i care to tell you how it works!

[thedude]

Thanks for elaborating.

Thanks sebosfato. You have my attention for what its worth. :P I certainly appreciate your willingness to share.

Love and light!

[Joit]

Oh my. The Paypal-Saga continues? For what?
To patent Stan Meyers Technolgie new for 'To Protect it from unqualified Peoples'?

[sebosfato]

Hello you all i'm coming up right now with info that anyone though before!
I solved the injector!

What happens when a conductor moves cutting a magnetic field?
A voltage is developed! in a direction 90° from the magnetic field lines and 90° from the movement!
What happen when we have water under a very high pressure and make it to pass thru a 0,40 mm diameter hole?
It will pass thru it at a very high speed!
water is not conductive thus ( the ionized gases were needed in the injector to create the conduction )
Lets say you have a 0,40 mm hole 6cm long (it will have a volume = to 7,5 ul ( the amount stan said was injecting for each injection cycle in each cylinder) accordingly to the volume of a cylinder calculation =((diameter/2)^2)*High)
Now you need to inject it in only 2ms what will be the speed of the water?
answer (6cm/0,002)*(7,5-7,4) ((volume of the tube - the amount of water to be injected) (this result is = to how many times the tube will fill per injection) well the result is almost 3000cm/sec
Now if you cut a magnetic flux of 15.000 gauss with water at this speed you will develop 1,7volts witch together with the ionized gas and a catalyzer element and resonance will actually crack the water!!!

Enjoy Freedom!

Now you just need to develop a certain pressure inside the tank, (only about 4 liters of water will be consumed in one hour thus even very high pressure will cost very low energy) and solenoids to do all the work...
What about this?
after 2010 years we can again walk on water...haha
Best Regards to you all
Donations are welcome! you find link on my you tube channel

Did you know that 7,4 ul of water = 13ml of gas h2+02 witch represents 3,33% of the 400cc cylinders meyer were using.

Yes he used positively ionized ambient gas...

He created the injectors to simplify and lower the costs
I believe the way to create this magnetic field will be with a coil around. Once i saw a meyers drawing of the injector with the coild around it. Only once.
His drawings of the electrodes aways remind me permanent magnets, Aways orientation check it. Yesterday i was thinking about pressure and flow and big bang! I first tried some numbers, and guess what? i took a look on the canadian injector patent and the size of the holes proposed by him were the same i was guessing, He mentioned in the patent 125 psi pump. It were well protected... Now is free! Fortunately

The electron gun had coils that reason too.

His work is based on MHD EHD magneto and electro hydro dynamics domain of plasma physics. Look for it on the mit site. Is the basics of the basics of power generation!!!!!!!! Is just like a generator works! Free Online MIT Course Materials | Physics | MIT OpenCourseWare

Even the resonant cavity and tube cell worked with this principle.

For the pressure i believe meyer used the Famous steam resonator to create, or a water pump. The volume of water to displace is very small. Look his drawings (compressor pump)

I didn't ran a car on water yet =( but soon is exactly what i want to do! i'm just short of money now and to design it well and make the pieces will cost a bit. But won't be too expensive for scale production hopefully!

Well good news!

Thank you all for being part of it!

Hope to finish this soon!

The ionizer works much the same way. EHD

If any of you want to help... help me to find out how much pressure you need to develop in a tank to make 3,7ml of water to pass thru a hole of 0,4mm of diameter every second. Would be great if any of you have the formula and know how to explain it for us! Thanks

-------
Why i calculated an injection timing of only 2ms:

I calculated like this because:

At 7000 rpm you have in a four cycle engine 3500 injections per injector. ( Rpm / 2 rotations per complete 4 cycles )

This gives us 58,3333 injections per second (Injections per minute / 60 seconds)

Than this mean that every 0,01714286 seconds you have a new injection ( 1 second / 58,33 injections per second)

I than divided this by 4 because there is 4 cycles and that gave me 0,004285717 seconds or 4,2 ms to complete each cycle

Considered than that in the injection cycle you will inject only during half of the movement when the piston is coming down so i divided it again by 2 so 2 ms

Than i calculated 1 second / 0,002 = 500 than i multiplied this for 7,4 ul and i got the result that if the solenoid remain open for 1 second 3,7ml of water would flow.

I did this to simplify the question:

How much pressure must a bomb develop or must be developed inside a water tank to make 3,7ml of water to pass thru a hole of 0,4mm diameter every second.

This will tell us the pressure we need to keep inside the tank or the pump pressure we are going to need for we can get the injector to work.

The speed the water will reach is easier to calculate:

The hole having 0,4mm of diameter and for say 6 cm of length give us a volume = to 0,0075396ml so if we are going to fill it with 7,4ul of water in a cycle of 0,002 seconds this mean it will fill 0nly 98% for each cycle. but this means that water will need to run over 6cm in only 0,002 seconds. than is easy I got 6/0,002*0,98 and that gave me the resultant water speed 2944 cm per second. This is only the start!

The formula was actually water speed = length in cm divided by injection time in seconds*(volume of water to be injected - volume of the hole (tube...))

The volume of a cylinder in ml is = 3,14*((Diameter in mm/2/10)^2)*length in cm

Hope now is cleaner =)

[Slovenia]

Please Don't!

Oh my. The Paypal-Saga continues? For what?
To patent Stan Meyers Technolgie new for 'To Protect it from unqualified Peoples'?

Hi Joit,

Please don't say anything that may derail this thread. Thanks!!

Best Regards,
Slovenia

[Slovenia]

Thank You!!

Hello you all i'm coming up right now with info that anyone though before!
I solved the injector!

What happens when a conductor moves cutting a magnetic field?
A voltage is developed! in a direction 90° from the magnetic field lines and 90° from the movement!
What happen when we have water under a very high pressure and make it to pass thru a 0,40 mm diameter hole?
It will pass thru it at a very high speed!
water is not conductive thus ( the ionized gases were needed in the injector to create the conduction )
Lets say you have a 0,40 mm hole 6cm long (it will have a volume = to 7,5 ul ( the amount stan said was injecting for each injection cycle in each cylinder) accordingly to the volume of a cylinder calculation =((diameter/2)^2)*High)
Now you need to inject it in only 2ms what will be the speed of the water?
answer (6cm/0,002)*(7,5-7,4) ((volume of the tube - the amount of water to be injected) (this result is = to how many times the tube will fill per injection) well the result is almost 3000cm/sec
Now if you cut a magnetic flux of 15.000 gauss with water at this speed you will develop 1,7volts witch together with the ionized gas and a catalyzer element and resonance will actually crack the water!!!

Enjoy Freedom!

Now you just need to develop a certain pressure inside the tank, (only about 4 liters of water will be consumed in one hour thus even very high pressure will cost very low energy) and solenoids to do all the work...
What about this?
after 2010 years we can again walk on water...haha
Best Regards to you all
Donations are welcome! you find link on my you tube channel

Did you know that 7,4 ul of water = 13ml of gas h2+02 witch represents 3,33% of the 400cc cylinders meyer were using.

Yes he used positively ionized ambient gas...

He created the injectors to simplify and lower the costs
I believe the way to create this magnetic field will be with a coil around. Once i saw a meyers drawing of the injector with the coild around it. Only once.
His drawings of the electrodes aways remind me permanent magnets, Aways orientation check it. Yesterday i was thinking about pressure and flow and big bang! I first tried some numbers, and guess what? i took a look on the canadian injector patent and the size of the holes proposed by him were the same i was guessing, He mentioned in the patent 125 psi pump. It were well protected... Now is free! Fortunately

The electron gun had coils that reason too.

His work is based on MHD EHD magneto and electro hydro dynamics domain of plasma physics. Look for it on the mit site. Is the basics of the basics of power generation!!!!!!!! Is just like a generator works! Free Online MIT Course Materials | Physics | MIT OpenCourseWare

Even the resonant cavity and tube cell worked with this principle.

For the pressure i believe meyer used the Famous steam resonator to create, or a water pump. The volume of water to displace is very small. Look his drawings (compressor pump)

I didn't ran a car on water yet =( but soon is exactly what i want to do! i'm just short of money now and to design it well and make the pieces will cost a bit. But won't be too expensive for scale production hopefully!

Well good news!

Thank you all for being part of it!

Hope to finish this soon!

The ionizer works much the same way. EHD

If any of you want to help... help me to find out how much pressure you need to develop in a tank to make 3,7ml of water to pass thru a hole of 0,4mm of diameter every second. Would be great if any of you have the formula and know how to explain it for us! Thanks

-------
Why i calculated an injection timing of only 2ms:

I calculated like this because:

At 7000 rpm you have in a four cycle engine 3500 injections per injector. ( Rpm / 2 rotations per complete 4 cycles )

This gives us 58,3333 injections per second (Injections per minute / 60 seconds)

Than this mean that every 0,01714286 seconds you have a new injection ( 1 second / 58,33 injections per second)

I than divided this by 4 because there is 4 cycles and that gave me 0,004285717 seconds or 4,2 ms to complete each cycle

Considered than that in the injection cycle you will inject only during half of the movement when the piston is coming down so i divided it again by 2 so 2 ms

Than i calculated 1 second / 0,002 = 500 than i multiplied this for 7,4 ul and i got the result that if the solenoid remain open for 1 second 3,7ml of water would flow.

I did this to simplify the question:

How much pressure must a bomb develop or must be developed inside a water tank to make 3,7ml of water to pass thru a hole of 0,4mm diameter every second.

This will tell us the pressure we need to keep inside the tank or the pump pressure we are going to need for we can get the injector to work.

The speed the water will reach is easier to calculate:

The hole having 0,4mm of diameter and for say 6 cm of length give us a volume = to 0,0075396ml so if we are going to fill it with 7,4ul of water in a cycle of 0,002 seconds this mean it will fill 0nly 98% for each cycle. but this means that water will need to run over 6cm in only 0,002 seconds. than is easy I got 6/0,002*0,98 and that gave me the resultant water speed 2944 cm per second. This is only the start!

The formula was actually water speed = length in cm divided by injection time in seconds*(volume of water to be injected - volume of the hole (tube...))

The volume of a cylinder in ml is = 3,14*((Diameter in mm/2/10)^2)*length in cm

Hope now is cleaner =)

Sebosfato,

Thanks for sharing with us.

Best Regards,
Slovenia

[sebosfato]

hi schpankme

I'm not north american so i don't know usa well, so i was talking about how almost all countries in this world including mines works probably is like this also in usa. There is a team of people from army aged for sure more than 65 years old that is responsible for the strategy and every decision the country must take. The presidents don't do anything without the opinion of this team! There is no democracy, gov don't do what is good for the people. The solutions for most of the problems are so clear and easy that this become very clear. Or they are too stupid, or they are not working to create the supposed order they should work for.


I don't want to produce posts that aren't related to the technology here so lets talk about water injector please. This way the thread will be cleaner and easier to read and understand. ok?

Thanks a lot

If you can help us with the question about the water pressure would be great !

Best Regards

[sebosfato]

Hi joit,

I have the right to change my mind, I got too many obstacles including army and ignorance from the gov, investors... So i decided that is not only up to me changing the world and so i decided to share here so we can do it safer and faster.

Hope you enjoy the info.

Donating is important because i still working exclusively on this and is the only way you can help me to keep working on it. until now since the other thread where i asked for donations i only got 250+- euros that became coper wire and materials lots of tests and knowledge! that now is being shared! Now the theory remained very close to what i proposed before and calculations don't lie you can find out it by yourself. There still some things to solve, materials to chose.. . so

Lets talk about solutions for problems.

Best Regards