Stan Meyers Secret, Preventing Electrolysis.

[bathurstfreak]

ieee paper and likely process for infinite loop

Hi,

I've been following this topic on various threads for a while and saw this paper, has any one read it? I think Meyer was right that he could produce gas but his end product was browns gas not pure diatomic hydrogen and oxygen. This even after my training as a qualified physicist and engineer.

It seams that mainstream science is slowly catching on.

IEEE Xplore - The Impact of Field Enhancements and Charge Injection on the Pulsed Breakdown Strength of Water

Once gas production rates are up, the process I believe will produce results is:

Meyer electrolysis for browns gas.
Ignite gas on high resistive steel surface to boil water.
Put steam through turbine of turbocharger to power compressor.
Put steam through Tesla turbine to generate electricity for fuel cell.
Use compressed air from turbo charger compressor to drive process.

[bathurstfreak]

Truly resonant Basic Schematic

I was thinking about the resonant charging circuit and was wondering if the circuit was truly resonating or simply being pulse charged through square wave input. If indeed it is simply being pulse charged then I propose the following simplified schematic.

I am not the greatest at electronics, I'm a mechanical engineer, however the philosophy is simple. It allows the water fuel cell to resonate as a DC system, not an AC system as is typical with resonance.



In the above example, the AC power source is tuned to the resonant frequency of the secondary on the transformer and the water capacitor in the water fuel cell. As the AC source resonates at the natural frequency, the switch in the middle of the diagram flips the polarity between the capacitor and the inductor when all the energy in the circuit is contained in the inductor, so that when the capacitor charges up again, all the charge is on the same side of the cell as the last time it was charged.

This would maximise the voltage potential whilst minimising the current input to the circuit. If current across the cell was severely restricted, very little energy would be inputted into the cell. The AC power source could be exchanged with a square wave pulse or rectified to make the switching of the circuit easier.

Your thoughts?

[mcalavera]

How can I get ahold of the IEEE document?
Can you please share?

Thanks

[bathurstfreak]

Pulsed Breakdown Strength of Water

I managed to find a copy of the document here,

http://repositories.tdl.org/ttu-ir/b...pdf?sequence=1

Otherwise search the full title in inverted commas and take the repositories.tdl.org link I managed to get it downloaded after a few tries. I will digest and see how relevant it is to WFC technology.

[bathurstfreak]

Switched Rectifed Resonance

I have a thought that doesn't require pulse charging, that I think can be more efficient than Meyers setup, it involves resonance where the charge isn't wasted, it is transferred between adjacent capacitive tubes.

Switched Rectified Resonant Circuit

What are your thoughts on this setup, can we resonate to the required voltages for the pulsed breakdown of water? What is the next step to optimizing the circuit?

[bathurstfreak]

Rectified Resonant Charging Circuit

Sorry, the link was broken, here is the Falstad.com code


$ 1 5.0E-6 0.9891409633455756 50 5.0 50
160 256 224 320 224 0 0.1 1.0E10
160 256 320 320 320 1 0.1 1.0E10
c 400 304 400 240 0 1.0E-7 219.38762319272385
w 400 304 320 304 0
w 400 240 320 240 0
v 176 224 176 288 0 1 711.76 13.6 0.0 3.141592653589793 0.5
g 176 320 176 352 0
w 288 112 288 208 0
g 208 96 144 96 0
a 208 112 288 112 0 5.0 0.0 1000000.0
w 208 128 176 128 0
r 176 128 176 224 0 1.0
w 320 208 528 208 0
l 256 320 176 320 0 0.5 0.006035634490930406
w 176 224 256 224 0
w 320 336 528 336 0
w 288 208 288 304 0
w 176 288 176 320 0
c 528 208 528 336 0 1.0E-7 -2.194908148567265E-7
159 496 240 496 304 1 20.0 1.0E10
159 432 304 432 240 0 20.0 1.0E10
w 448 272 464 272 0
w 464 272 480 272 0
w 464 272 464 112 0
w 464 112 288 112 0
w 496 240 528 208 0
w 496 304 528 336 0
w 400 304 432 304 0
w 400 240 432 240 0
o 5 8 1 35 1.25 9.765625E-5 0 -1
o 2 8 0 34 320.0 0.4 0 -1
o 18 8 0 34 320.0 0.4 0 -1
o 13 8 0 33 160.0 0.1 0 -1

[tachyon]

Sorry, the link was broken, here is the Falstad.com code


$ 1 5.0E-6 0.9891409633455756 50 5.0 50
160 256 224 320 224 0 0.1 1.0E10
160 256 320 320 320 1 0.1 1.0E10
c 400 304 400 240 0 1.0E-7 219.38762319272385
w 400 304 320 304 0
w 400 240 320 240 0
v 176 224 176 288 0 1 711.76 13.6 0.0 3.141592653589793 0.5
g 176 320 176 352 0
w 288 112 288 208 0
g 208 96 144 96 0
a 208 112 288 112 0 5.0 0.0 1000000.0
w 208 128 176 128 0
r 176 128 176 224 0 1.0
w 320 208 528 208 0
l 256 320 176 320 0 0.5 0.006035634490930406
w 176 224 256 224 0
w 320 336 528 336 0
w 288 208 288 304 0
w 176 288 176 320 0
c 528 208 528 336 0 1.0E-7 -2.194908148567265E-7
159 496 240 496 304 1 20.0 1.0E10
159 432 304 432 240 0 20.0 1.0E10
w 448 272 464 272 0
w 464 272 480 272 0
w 464 272 464 112 0
w 464 112 288 112 0
w 496 240 528 208 0
w 496 304 528 336 0
w 400 304 432 304 0
w 400 240 432 240 0
o 5 8 1 35 1.25 9.765625E-5 0 -1
o 2 8 0 34 320.0 0.4 0 -1
o 18 8 0 34 320.0 0.4 0 -1
o 13 8 0 33 160.0 0.1 0 -1

what is this?

[bathurstfreak]

Falstad Circuit Analysis

Open this link and paste aforementioned code into the import window...

Circuit Simulator Applet