Aromaz Radiant Energy Joint Research Group

[Inquorate]

Directional RF detector

Hi guys, this is what I found re RF field strength and direction detection, more than a year ago now I think.

YouTube - Inquorate 23 detector

An avramenko plug and leds would also work well; with metal mass on one leg of the avramenko plug extended like the wires in the light saber thing, and alfoil extended horizontally along the same line, it too should be directional unless saturated by an RF bubble

[Aromaz]

I found this interesting description of scalar waves:



Original was copied from: Yoga Retreats, Energy Healing and Accupuncture Therapy plus alternative health practitioners directory from the Insight Directory in Nevada City, Grass Valley and Auburn, Northern California - but the exact article is no more.

[Inquorate]

Scalar

Stands to reason that cancelling magnetic waves creates scalar; the energy cannot be destroyed, so when one tube of magnetic force meets it's opposite, they cannot disappear, nor the RF that they would have emitted.

Where does it go then, this energy? It must change form.

I was talking to Rave154 over skype about that a week or so ago.

Interesting is this comparison between capacitive and inductive storing of energy by eric dollard;

Eric Dollard and Tesla

Love and light

[Joit]

Pizza Calzone

Funny, that you mention this Coil.
At the ECD- TPU they use a moebius Coils too,
but fold the Shape 8 into half, arrange the halfs beside each other in a dertain distance,
have Coils around the Wires, and pulse it.
The Generator- or Inductorcoil is connected to Minus from the Circuit, and got this Way his own Plus.
I didnt have much luck at all with simple 8 shaped Coils,
maybe i just didnt look far enough on it.
The Energy from it may just dissolve in Space, when you dont use it.

[sucahyo]

I found this interesting description of scalar waves:

Scalar waves are produced when two electromagnetic waves of the same frequency are exactly out of phase (opposite to each other) and the amplitudes subtract and cancel or destroy each other. The result is not exactly an annihilation of magnetic fields but a transformation of energy back into a scalar wave. This scalar field has reverted back to a vacuum state of potentiality.

E-H antenna achieve 90 degree out of phase with tuning capacitor. It produce both scalar and normal wave.

[Aromaz]

Simple, Cheap and Rugged Signal Generator

God I wish I had a signal generator - though a 10mhz xtal sig gen I do have..

YouTube - Comparison of Tesla Bifilar and Pancake Coils

[Inquorate]

Signal gen

I get what you're saying. Hv and sparks make mechanical switching much more able to hit mhz.

I have a pretty high rpm motor as you know. Plastic wheels and rubber bands will do the rest.

I'll make one. Hope you're using the light dimmer and dual ignition coil setup to obtain the 60kv hv - hardest part of that is the 80kv diodes from ebay, and 20+ kv capacitors in an oil bath for constant dc

Love and light

[Inquorate]

I just noticed

@ Aromaz - you said all in one, inc diode

Are you going to use the magnetic diode proof of concept? Hope you do.. I've been thinking about doing a rebuild of that device. Caution; araldite epoxy glue conducts hv.

[Aromaz]

@Inquorate;

I have a pretty high rpm motor as you know. Plastic wheels and rubber bands will do the rest. just watch out for the centrifugal force; might get some KFO's. (Known Flying Objects)

I'll make one. Hope you're using the light dimmer and dual
ignition coil setup ......Nope;

For HV - that is my first new tool to be made soonest I am operational.
I am building an accurate coil winding machine. Intend to build my own new
(Massive) induction coil: Dual identical units 200,000 secondary windings,
500 primary windings, Carbon 'removable' core, oil cooled (circulating
pump and heat exchanger to cool down).

Input via Variac up to 240VAC - rectifier - pulsed possitive to one coil, neg
to other coil. Hope to get 120KV - all volt, no current.

This is rather aimed at the gravity project; but will be usefull for all other
applications.

[Inquorate]

hv coil

Sweet, consider me on board. One of the things I want to do is to compare / investigate the difference between static electricity and gravity vs hv from coil.

Wimshurst generators can cost from $50 au, pretty cheap. All voltage, no current.

[Aromaz]

@ Aromaz - you said all in one, inc diode

Are you going to use the magnetic diode proof of concept? Hope you do.. I've been thinking about doing a rebuild of that device. Caution; araldite epoxy glue conducts hv.

The space between any two tips on your wheel is void - thus there can be no flow back - 'auto-diode'. However we will have to see about the resonance effects, might lead to something else. If you use a pick-up sensor
and can adjust your rotary speed to hit full on resonance; each time the
BEMF hits the start point, you pulse it with next booster...

Better use Faraday cage and remote control.

Nail biting!

Still remaining with old question: How exactly does a transformer works?

[Inquorate]

However we will have to see about the resonance effects, might lead to something else. If you use a pick-up sensor
and can adjust your rotary speed to hit full on resonance; each time the
BEMF hits the start point, you pulse it with next booster...

Better use Faraday cage and remote control.

Nail biting!

Still remaining with old question: How exactly does a transformer works?

Now, hitting the bemf with another hv spike might be interesting... That would possibly roar.

[Inquorate]

Evolution

We could get much higher switching out of this:

Hv hf sg switch - Vox

Love and light

[Vortex]

Please remember and take note of the totally different electrical energy available.
The difference is observable by SOUND, COLOR, Movement/Motion of spark
and can been seen in many videos on the internet, if you are looking for it.

Allow for usage and experiments using both energies when creating/constructing your mechanical signal generator.
Bodkins video YouTube - Electric flow HV

I had the question in my mind about how a SG could be mechanically created, but POOF it was already being documented here in this thread. (spooky how that happens)

just thinking
randy

[Aromaz]

We could get much higher switching out of this:

Hv hf sg switch - Vox

Love and light

Yes, that should also work. The spike wheel does actually allow for a little more options. For instance, I intend to use tungsten tips (from argon tig welder). Another option is like building capacitors onto the wheel for charging high during rotation period away from spark ....

Vortex: You are very right. For my personal target, I want high volt, no current. If one needs current, can replace spark gap with contact copper plates or brushed rotor; then you can draw high(er) amps.

The video of Bodkins: We are getting back to one of my earlier questions here; and this video points that nicely out. How exactly does electricity move along a conductor? Personally I now tend to step away form the 'electron' jumping concept. There is more into it than we know for sure.

Yes, was it not for the desperate outcry of Inquorate, I would not
have described it before I actually made my proto next month. I tend to go in 'twitching mode' when thinking of all the projects I want to run - ASAP; but force myself to set my workspace first and at most remain 'inactive' until 1 January.