Mechanical Devices with Energy Gain

[PhysicsProf]

PhysicsProf, I am humbled by your selflessness to share your knowledge and resources with the world. Your generosity makes me want to reveal more of my ideas and give some dimentions so all can replicate my system. For me, it has never been for financial gain, but more of a sense of destiny to share with others. If knowledge is acquired, I think it should be passed on, as so much has been lost over the centuries. many great civilizations have thrived and developed or discovered amazing technology, only to be lost or locked away from its general populace or made illegal to use. It will take some time to get together all the dimentions and fully explain the operations of my "torque converter". I found a remnant of the original prototype, only half, and well rework it or build another to obtain exact lengths and tolerances. I have also decided to contact IRon and find out if I can help him with his or find out if our technologies can mesh together or not. I have seen his videos and they are different form mine. Good Luck. stealth

Thank you, stealth -- I totally agree and wish you the very best in your endeavor. Amazing, isn't it, how Tesla, Moray, Davey and perhaps Bedini and others have had their technology kept away from the populace, kept away from the benefit of mankind!

I'm hopeful that you will break through this barrier, and be the first or among the first to truly do so.

[tachyon]

Has anybody of you constructed a steorn motor?.. or has some toroid coils and magnets lying around and want to do an experiment? pm me

[i_ron]

Dr.Steve

Hi....


Iam referring to Ramos device, will send you news about my work soon, device is works with input 1 kw and output 10 kw and 1 kw to 18 kw for each design.
For 5-10 kw output, will use home design not much weight
Motor and generator will install to flywheels,
I will send more info soon, we are not company to sell device but everyone can have one for himself.

B.R

Antonio

Hello Antonio,

Any progress to report?

Regards,

Ron

[Aaron]

Jim Murray, etc...

I put up the Tesla Articles that Jim Murray references in the video posted here: Jim Murray's Mechanical Amplifier

Jim Murray tells exactly what is required to boost the work done.

Such as in the SERP solid state circuit (Steinmetz) reflection going back to the front. Was worked out by Jim Murray and Eric Dollard. That is just one of the principles.

Jim Murray's explanation is probably the simplest and most elegant explanation of how to increase work with a mechanical amplifier and it is all right there in that video.

The Fernando mechanism demonstrates this principle as well.

It violates the 3rd law of motion. All reflection in the system is positively feedback to the front reinforcing the input in the same direction just like martial arts and just like in the Veljko oscillator. The reflection or reactive force does not buck the input.

I give the breakdown in the Fernando thread over there in post #4. Arto Heino's diagram is all that is needed to see what the Fernando machine does as it is self evident by just looking at it.

At minimum, if the reflection is in a forward feedback mode to assist the input in the same direction, at minimum, the system should double the amount of work done (not just a power increase).

Also, it doesn't not have to go very fast. With a larger one with heavy enough flywheels, if there is that much of a torque increase, you can have it run extremely slow and just gear it with a pulley drive to turn a generator at any speed you want - so the mechanical limitations of the thing ripping itself apart are actually non-issues.

[Matthew Jones]

I put up the Tesla Articles that Jim Murray references in the video posted here: Jim Murray's Mechanical Amplifier

Jim Murray tells exactly what is required to boost the work done.

Such as in the SERP solid state circuit (Steinmetz) reflection going back to the front. Was worked out by Jim Murray and Eric Dollard. That is just one of the principles.

Jim Murray's explanation is probably the simplest and most elegant explanation of how to increase work with a mechanical amplifier and it is all right there in that video.

The Fernando mechanism demonstrates this principle as well.

It violates the 3rd law of motion. All reflection in the system is positively feedback to the front reinforcing the input in the same direction just like martial arts and just like in the Veljko oscillator. The reflection or reactive force does not buck the input.

I give the breakdown in the Fernando thread over there in post #4. Arto Heino's diagram is all that is needed to see what the Fernando machine does as it is self evident by just looking at it.

At minimum, if the reflection is in a forward feedback mode to assist the input in the same direction, at minimum, the system should double the amount of work done (not just a power increase).

Also, it doesn't not have to go very fast. With a larger one with heavy enough flywheels, if there is that much of a torque increase, you can have it run extremely slow and just gear it with a pulley drive to turn a generator at any speed you want - so the mechanical limitations of the thing ripping itself apart are actually non-issues.

Can you post them here?

Thanks
Matt

[i_ron]

Can you post them here?

Thanks
Matt

Arron, I second that!

In seven attempts I have been unable to register with that forum. I can only assume you don't want people to join.

Ron

[Aaron]

registration

Arron, I second that!

In seven attempts I have been unable to register with that forum. I can only assume you don't want people to join.

Ron

Everyone is welcome to join. Can you pm me with the email and username you want? I can set it up. It is a newer version of vbulletin and there is heavy duty spam protection. It is amazing how many people's emails, etc... are submitted to the large spam databases even if they aren't spammers.

[Peter Lindemann]

Links Here

OK Guys,

Here are the links in this thread.

Here is the film clip of Jim on YouTube: Mechanical Amplifier by Jim Murray - YouTube

Aaron is going to have to link to the articles.

The film clip is a start.

Peter

[Matthew Jones]

Arron, I second that!
In seven attempts I have been unable to register with that forum. I can only assume you don't want people to join.
Ron

April 1919 , Moons Rotation, Nikola Tesla
June 1919 , Moons Rotation, Nikola Tesla

Here ya go, I got frustrated too so I just hacked the forum server and stole the files. LOL

Matt

[Aaron]

the real files

Sure you did - same content but not the same files.

Here are the real files:

http://www.energyscienceforum.com/files/tesla/nikolatesla-themoonsrotation-april1919.pdf

http://www.energyscienceforum.com/files/tesla/nikolatesla-themoonsrotation-june1919.pdf

[Aaron]

The Moon's Rotation by Nikola Tesla

Here are both files merged into one single pdf - 5 pages long for convenience.

http://www.energyscienceforum.com/files/tesla/nikolatesla-themoonsrotation.pdf

[Matthew Jones]

Sure you did - same content but not the same files.

Here are the real files:

http://www.energyscienceforum.com/files/tesla/nikolatesla-themoonsrotation-april1919.pdf

http://www.energyscienceforum.com/fi...n-june1919.pdf

You got to admit, you thought about it enough to check.

Matt

[Aaron]

@Matt

Good one! lol

[i_ron]

Email

Everyone is welcome to join. Can you pm me with the email and username you want? I can set it up. It is a newer version of vbulletin and there is heavy duty spam protection. It is amazing how many people's emails, etc... are submitted to the large spam databases even if they aren't spammers.

Thanks Aaron, but you are talking to someone who had to get one of the kids to program the VCR, lol --- how do I pm you? I see no email box like on other forums

Ron

[Matthew Jones]

Just click on his name it come up in the list.

Matt