BiTT OverUnity Transformer Bi-Toroid Thane H. Bill A.

[BroMikey]

Lost Me

You lost me on that Idea. A BiTT requires a special core material to run a specific frequency and the windings get cold not hot.

Once you have a working BiTT then send the excess power to the block heater.

Mikey

bi toroid rotary engine using the main shaft as the primary
core wind, with secondary's wound around the intake and exhaust manifolds





the entire engine is wrapped in the bi toroid coils and effortlessly kept warm
by back EMF once the engine is turned off

[Doogy2Shoes]

You lost me on that Idea. A BiTT requires a special core material to run a specific frequency and the windings get cold not hot.

Once you have a working BiTT then send the excess power to the block heater.

Mikey

I am obviously out of the loop on this, we run the engine tuned to that frequency and it generates electricity via the BiTT windings around it?
thanks again for your stalwart work toward a working BiTT, BroMikey.
wish I could be of more of more help

Could you get a LOAD of public support and investment if you put your current trajectory in simple language to get a successful kickstart
(crowdfunding) completed ? I think so. Youtube what you want to do and how people can donate or invest.
Kickstarter - Wikipedia, the free encyclopedia
To capture the imagination , you show them the goal, how far along you are, what you need the money for , to buy what , do what...etc. whether its a a home energy grid BiTT or a block heater BiTT, its the same, they need to see the target destination.

I intuitively lean toward something smaller scale like the block heater.
People might see it as more achievable and less radical.

[Doogy2Shoes]

A BiTT requires a special core material to run a specific frequency and the windings get cold not hot.

perfect, then. We tune the engine to the perfect frequency to act as the core,
and then the windings cool the engine while charging an auxilliary block heater battery.

Synergy is always the answer.

[Doogy2Shoes]

Stirling engine - electronic adjustment

http://www.youtube.com/watch?v=sDgM4Jb5Kls

QUOTE
With an electronic circuit and a loudspeaker this free piston Stirling engine is adjustable. It can work in very high frequency.
It's an astable multivibrator, which drives a loudspeaker, connected to the displacer

[BroMikey]

confusion

You need to post your stuff on another thread. Do you know how to make a THREAD? If not, I can make one for you so you can post.

The BiTT is not a motor. I think you are trying to make it work with a motor, but that is not what a Bi-Toroidal Transformer does.

Bi.T.T. = "Bi"-"Toroidal"-"Transformer" also SFT = S.F.T. "Split" - "phase" - "Transformer"

All of these are coils of wire like a standard transformer has but the secondaries (TWO) must be coupled with a large amount of core material than the primary coils have.

This is not a motor thread.

Mikey

[Doogy2Shoes]

BroMikey, I love your thread. I don't want to wreck it by posting too far off-topic and distracting from your cutting edge work at all.

I was just trying to help with the frequency end of things.

Could there be a way to artificially tune the frequency of the BiTT instead of using hit and miss techniques with different materials and different proportions?

in my admittedly severely retarded opinion, the finality to solve this could mean using some means to adjust the BiTT frequency, fluidly , with some sort of easily variable means like sound waves and an amplifier. Think of the BiTT as a tuning fork and devise means of altering the frequency , selectively, until the desired frequency is reached to produce the desired power output.

I will create another thread to try to explore this. I have not a fraction of your expertise in this field obviously. I hope we all succeed in this .

[BroMikey]

Doogy2Shoes

Make a thread and I will come over there and comment. It sounds like you know some stuff I don't. Tuning using a fluid? sounds like a winning combo.

Mikey

BroMikey, I love your thread. I don't want to wreck it by posting too far off-topic and distracting from your cutting edge work at all.

I was just trying to help with the frequency end of things.

Could there be a way to artificially tune the frequency of the BiTT instead of using hit and miss techniques with different materials and different proportions?

in my admittedly severely retarded opinion, the finality to solve this could mean using some means to adjust the BiTT frequency, fluidly , with some sort of easily variable means like sound waves and an amplifier. Think of the BiTT as a tuning fork and devise means of altering the frequency , selectively, until the desired frequency is reached to produce the desired power output.

I will create another thread to try to explore this. I have not a fraction of your expertise in this field obviously. I hope we all succeed in this .

[BroMikey]

Energy Looping

Loopers

https://www.youtube.com/watch?v=PU5JvO1opkk

https://www.youtube.com/watch?v=mzE-p0GJb_Q

https://www.youtube.com/watch?v=s3T6kEic5G0


In all cases AKULA, LASERSABER or MR.CLEAN 3 coil windings are used making an open loop circuit.

[Bob Smith]

Mike,
Check out what Forest says here:
My thoughts on how to make a solid state QEG
and also the schematic he posts before that post.
Bob

[BroMikey]

Heads Up

Thanks Bob

The QEG work looks like many OVERUNITY transformers. Well the search for overunity.

I like the reading but like almost every device on the web, no one has any claims of extra. That I could see.

Mikey

Mike,
Check out what Forest says here:
My thoughts on how to make a solid state QEG
and also the schematic he posts before that post.
Bob

[Dog-One]

mishail video

https://www.youtube.com/watch?v=TgZxRLM8ZZQ

[BroMikey]

Same Man's Video's

https://www.youtube.com/watch?v=TgZxRLM8ZZQ

Hey Dog

I saw this guy but I can't understand the words. Here is another video of him

https://www.youtube.com/watch?v=7ulGPJ_-FRc

[a.king21]

More info

Hey Dog

I saw this guy but I can't understand the words. Here is another video of him

https://www.youtube.com/watch?v=7ulGPJ_-FRc

There's a huge amount of information about this technology on this thread:
Kapanadze Cousin - DALLY FREE ENERGY

ps I've been told that Auroratek are looking for 5 million USD in investment to commercialize their devices.

[BroMikey]

Thanks King

I am a member over there but I didn't see that thread til now. Thank you very kindly. I have seen your posts in the past. Good to see you are still around.

The transformers CCW and CW wound as in Kapagen or DON Smith are very good study material. The answers are in the experiments. These guys are experimenters and they tent to ignore the others who have no data. They should. The disinformation comes from speculators not experimenters.

Wesley is an excellent choice for going against the disinfo cronies. Wesley backs down to no one and will fight til the end against the scientific lies keeping the people bound to their power poles.

So this site thread is A#1

Mikey

There's a huge amount of information about this technology on this thread:
Kapanadze Cousin - DALLY FREE ENERGY

ps I've been told that Auroratek are looking for 5 million USD in investment to commercialize their devices.

[BroMikey]

ZVS driver

Here is a real circuit with all the values. The thing that strikes me is the feedback coil of 4Turns. Thane used these feedback coils. Anyone pulsing a coil needs to get it pulsing above and below the zero line.

First a typical inverter using two Tip35c. This one is more complex than the second drawing. What we should be seeing is the split winding toggled by the TIP35c pair to make a crude form of AC.

In each case these are real circuits, not fantasy. Most of what we find on the web today are hypothetical (might be ) untested. So when you find a real working circuit that does not make you chase it in the desert like a mirage, wondering if it is really there, then please post it.