New Stan Meyer replication

[Aaron]

what is free energy

I have to admit I am one of the people who thought free energy was free.

I posted this for clarification of course from my perspective and to not deviate from the topic of this thread. http://www.energeticforum.com/renewa...ergy-what.html

[tachyon]

meyer used ultrasounds from what I know

[Duncan]

Browns Gas - YouTubeOpie & Anthony: Stan Meyer's Water Car - YouTube
"Land of the free" ... Mortal coil!

[jonabel1971]

Thanks.

Thanks for the kind words. I did try hooking up Lawton's ENTIRE circuit.

My results were inconclusive in terms of efficiency, and I didn't spend too much time trying to hit "resonance" with Lawton's FULL circuit setup - but, running at 1 amp and 12 volts, it was visibly creating more gas then my limited Meyer's replication.

Lawton's FULL circuit doesn't allow you to go much higher - in terms of voltage & power input, however.

With Stan's circuit, you can scale up the voltage. My new VIC is completed at a ratio of 121:1. 30 volts should give me 3630 volts output - enough to test for polarization.

I've seen that Opie & Anthony Radio Show before. That is insulting as a human being to watch people openly mock a murder. Regardless of who.

That attitude is permeating most of the North Dakota population, right now. When you tell them about it - even the nicest old granny will look you in the eye and say "Oh Sonny, somebody's gonna come kill YOU!"

Sometimes, even a granny can sound like a b****.

The DJs didn't even attack the technology - just the dead inventor. We are not evolving yet.

Browns Gas - YouTubeOpie & Anthony: Stan Meyer's Water Car - YouTube
"Land of the free" ... Mortal coil!

[jonabel1971]

I wish someone would force Tachyon to do some reading - before posting.
I don't think I have heard him say 1 technical thing correctly since I came here a month ago. What is a senior member doing - talking like that? Disgraceful.

It's gotta be a bot.

[jonabel1971]

Thanks, have you tried this circuit with Naudin's WFC coil circuit?

Will it resonate?

anythingEither the frequency or the pulse width can be changed without the other being effected.

[Duncan]

circuit ...

comments ... A pleasure Jon .. you are sharing your experiance free of charge
as a hybrid of your control circuit and that demostrated by the Mad Scientist ..
This "best of both worlds" by RM cybernetics might fit the bill.
DIY Homemade Signal Generator with Pulse Width Modulation - RMCybernetics
It would seem they will supply built which is good for those with little or no electronics experiance .. or else the construction detail is there ... according to the detail the full range of the 555 is avaliable ... and like wise the duty cycle
Best wishes Duncan
PS also if of interest the Dave Lawton PCB is avaliable here
Dave Lawton Electrolyser Pulse Width Modulator (PWM) - PCB | eBay

[jonabel1971]

You need 2 frequencies & at least 1 duty cycle. The other duty cycle can be left at 50%.

This circuit doesn't do that.

comments ... A pleasure Jon .. you are sharing your experiance free of charge
as a hybrid of your control circuit and that demostrated by the Mad Scientist ..
This "best of both worlds" by RM cybernetics might fit the bill.
DIY Homemade Signal Generator with Pulse Width Modulation - RMCybernetics
It would seem they will supply built which is good for those with little or no electronics experiance .. or else the construction detail is there ... according to the detail the full range of the 555 is avaliable ... and like wise the duty cycle
Best wishes Duncan
PS also if of interest the Dave Lawton PCB is avaliable here
Dave Lawton Electrolyser Pulse Width Modulator (PWM) - PCB | eBay

[tutanka]

You need 2 frequencies & at least 1 duty cycle. The other duty cycle can be left at 50%.

This circuit doesn't do that.

You need just one board with one frequency max to 100Khz with variable duty cycle (trought two switches) for increase or decrease current on your HHO cell and an additional on/off pulse for save some electrical power creating splitting positive (and negative) effect. Of course .. for have zero oxidation on your plates you need electronic reverse polarity, That's all!!

[Joit]

Maybe?

You need just one board with one frequency max to 100Khz with variable duty cycle (trought two switches) for increase or decrease current on your HHO cell and an additional on/off pulse for save some electrical power creating splitting positive (and negative) effect. Of course .. for have zero oxidation on your plates you need electronic reverse polarity, That's all!!

Maybe in your Circuitry, but this one is not Yours, Tutanka.
So leave it, to try to make things here complicated.

Mixing 2 Frequencys did give often other Results as some expect.
Leave it, when its not your Case.

[tutanka]

Maybe in your Circuitry, but this one is not Yours, Tutanka.
So leave it, to try to make things here complicated.

Mixing 2 Frequencys did give often other Results as some expect.
Leave it, when its not your Case.

Let me think...

Mixing two frequencies what can appear??

Nothing of NEW.. in this forum Mike have written and explain sometimes about heterodyne effect!!!

CHECK --> http://www.energeticforum.com/renewa...tml#post176297

[jonabel1971]

2 frequencies are needed for resonant Stan Meyer effects. The bifilar wrap is also needed.

Otherwise, yes - you can reduce heat and current with your PWM.

Many companies already sell these online with their HHO generators for cars today - but it's not using resonance - it's just a cooler running and more efficient DC electrolysis. No magnetic transformers are needed if you do it that way.

But, you won't be able to build the step-wise, repeating, resonant signal with only one frequency.

Please don't confuse the issue by telling people that - this is a thread about a Stan Meyer replication.

And then you add a link to direct people to Nunnerly's paper? This isn't Stan Meyer's work either. Can we keep on topic here?

Let me think...

Mixing two frequencies what can appear??

Nothing of NEW.. in this forum Mike have written and explain sometimes about heterodyne effect!!!

CHECK --> http://www.energeticforum.com/renewa...tml#post176297

[tutanka]

2 frequencies are needed for resonant Stan Meyer effects. The bifilar wrap is also needed.

Otherwise, yes - you can reduce heat and current with your PWM.

Many companies already sell these online with their HHO generators for cars today - but it's not using resonance - it's just a cooler running and more efficient DC electrolysis. No magnetic transformers are needed if you do it that way.

But, you won't be able to build the step-wise, repeating, resonant signal with only one frequency.

Please don't confuse the issue by telling people that - this is a thread about a Stan Meyer replication.

And then you add a link to direct people to Nunnerly's paper? This isn't Stan Meyer's work either. Can we keep on topic here?

The link is just for understand how heterodyne work!!
When you mix two frequencies togheter We are talking of heterodyne!
The resonance inside ALL HHO CELLS is reached ONLY with heterodyne..
If your circuit work why you don't share an video as me?
Thanks for read me

[jonabel1971]

I got lots of videos showing rising pulses and actual resonance that matches Stan's RESONANT signal from page 137 of his Tech Brief.
See links below.

Where are the links to your videos?

I am not even going to question your statement, "The resonance inside ALL HHO CELLS is reached ONLY with heterodyne.. "
It's obviously false.

I wish you would research - a little - before saying stuff like that.

Scalable Rapid Hydrogen Production Machine Replicated at a Fargo, ND university on June 1st, 2011 - YouTube (June 1st, 2011)
Scalable Rapid Hydrogen Production Machine Replicated at a Fargo, ND university on June 20th, 2011 - YouTube (June 20th, 2011)
Scalable Rapid Hydrogen Production Replicated at Fargo ND University - YouTube (June 20th, 2011)
Scalable Rapid Hydrogen Production Replicated at Fargo North Dakota University - YouTube (June 20th, 2011)
Resonance with a diode.mp4 - YouTube (May 3rd, 2012)
https://www.youtube.com/watch?v=TwenfkbDi9Q (unpublished - 15 minute video showing how to reach rising pulse signal).
https://www.youtube.com/watch?v=cgzLov6nDlQ (unpublished - 3 minute continuation - showing actual resonance).

The link is just for understand how heterodyne work!!
The resonance inside ALL HHO CELLS is reached ONLY with heterodyne..
If your circuit work why you don't share an video as me?
Thanks for read me

[tutanka]

I got lots of videos showing rising pulses and actual resonance that matches Stan's RESONANT signal from page 137 of his Tech Brief.
See links below.

Where are the links to your videos?

I am not even going to question your statement, "The resonance inside ALL HHO CELLS is reached ONLY with heterodyne.. "
It's obviously false.

I wish you would research - a little - before saying stuff like that.

Scalable Rapid Hydrogen Production Machine Replicated at a Fargo, ND university on June 1st, 2011 - YouTube (June 1st, 2011)
Scalable Rapid Hydrogen Production Machine Replicated at a Fargo, ND university on June 20th, 2011 - YouTube (June 20th, 2011)
Scalable Rapid Hydrogen Production Replicated at Fargo ND University - YouTube (June 20th, 2011)
Scalable Rapid Hydrogen Production Replicated at Fargo North Dakota University - YouTube (June 20th, 2011)
Resonance with a diode.mp4 - YouTube (May 3rd, 2012)
https://www.youtube.com/watch?v=TwenfkbDi9Q (unpublished - 15 minute video showing how to reach rising pulse signal).
https://www.youtube.com/watch?v=cgzLov6nDlQ (unpublished - 3 minute continuation - showing actual resonance).

From your video I don't see flame test or good gas production.

When heterodyne effect work inside the cell you produce some gas because the reaction produce more current independently from the input.
This effect is visible clearly inside my video .. the power supply go to zero absorption producing every same amount of gas.

Here are my videos.. I have started in a fast time but the next week I sent new one increasing heterodyne effect building an new firmware with different heterodyne pulses on plates.

http://www.energeticforum.com/renewable-energy/13605-kit-board-hho-dry-cells.html#post227792